Panasonic DMC-LX2 Setting Date/Time Clock Set, Press MENU/SET several times to close the menu

Preparation

Setting Date/Time (Clock Set)

nInitial setting

The clock is not set when the camera is shipped. When you turn the camera on, the following screen appears.

A

B

A: [MENU/SET] button

B: Cursor buttons

1 Press [MENU/SET].

2Press e/r/w/q to select the date and time.

C:

D :

CLOCK SET

0 : 00	JAN . 1	. 2006	or
	M D Y
		CANCEL
SELECT	SET	EXIT MENU

C: Time at the home area

D: Time at the travel destination (P72)

•w/q : Select the desired item.

•e/r : Set date and time.

•Refer to [WORLD TIME] (P72) for information about setting the local time at the travel destination area.

•You can press [A] to cancel the operation without setting the clock.

3 Press [MENU/SET] several times to close the menu.

•You can also press the joystick to close the menu.

•Turn the camera off after finishing setting the clock. Then turn it on and check that the clock setting is correct.

Changing the clock setting

1Press [MENU/SET].

2Press e/r to select [CLOCK SET] (P93). 3Press q and perform the above steps 2

and 3 for setting.

REC	4/4
CLOCK SET
SELECT	EXIT MENU

•You can set the clock from the setup menu (P21) while in playback mode [Q].

•You can use both the cursor buttons and joystick for this operation.

•When a fully charged battery has been inserted for more than 24 hours, the clock setting is stored (in the camera) for at least 3 months even if the battery is removed.

•You can set the year from 2000 to 2099. The 24-hour system is used.

•If you do not set the date, the date cannot be printed when you go to a photo studio for digital printing. (P100)

20

VQT0Y44