Panasonic DMC-LX2 operating instructions Charging the Battery with the Charger

Preparation

Charging the Battery with the Charger

The battery is not charged when the camera is shipped. Charge the battery before use.

1 Attach the battery with attention to the direction of the battery.

2 Connect the charger to the electrical outlet.

•When the [CHARGE] indicator A lights in green, charging starts.

•When the [CHARGE] indicator A turns off (in about 130 minutes), charging is completed.

•Refer to P14 when the [CHARGE] indicator blinks.

3 Detach the battery after charging is complete.

•After charging is completed, be sure to disconnect the charger from the electrical outlet.

•The battery becomes warm after use/ charge or during charge. The camera also becomes warm during use. However, this is not a malfunction with the camera.

•The battery will discharge if left for a long time after charging. Recharge it.

•You can recharge the consumed portion before exhausting the remaining charge.

•Use the dedicated charger and battery.

•Charge the battery with the charger indoors.

•Do not disassemble or modify the charger.

A

B: Open until it clicks.

13

VQT0Y44