Panasonic AJ-HD1400E, J-HD1400P Reference signals

Parts and their functions (continued)

IEEE1394 digital input/output connector

This unit is capable of input and output through a digital interface conforming to the IEEE1394 standard. Use 6- pin connectors. Does not support bus power.

Reference signals

During tape playback, the video output reference signals are as shown in the table below.

In the 59.94 Hz/60 Hz or 50 Hz mode

Input signals			Menu item No.031
REF_IN	INPUT	AUTO	HD_REF	SD_REF	INPUT*1
HD_REF_IN	Input	HD_REF_IN	HD_REF_IN	Internal SD	INPUT
	Not input	HD_REF_IN	HD_REF_IN	Internal SD	Internal HD
SD_REF_IN	Input	SD_REF_IN	Internal HD	SD_REF_IN	INPUT
	Not input	SD_REF_IN	Internal HD	SD_REF_IN	Internal SD
None	Input	INPUT	Internal HD	Internal SD	INPUT
	Not input	Internal HD	Internal HD	Internal SD	Internal HD

*1 If “1394” or “INT SG (internal standard signal)” is selected for the video input signal, the video output reference signal will always be “Internal HD.”

<Notes>

zWhen “E-AUTO” is selected in menu No. 031 OUT REF, the unit operates as if “INPUT” is selected in edit mode or “AUTO” is selected in modes other than the edit mode.

zWhen using the SD > HD up-converter and HD > HD cross-converter, input the HD tri-level sync signal that supports the HD output format in order to initiate operation using HD_REF_IN.

In the 23.98 Hz/24 Hz mode

Input signals
REF_IN
HD_REF_IN	HD_REF_IN
None	Internal HD
In the 25 Hz (HD), 25 Hz (SD), 50 Hz (HD) or 50 Hz (SD) mode
Input signals		Menu item No.031
REF_IN	AUTO	HD_REF	SD_REF	INPUT
HD_REF_IN	HD_REF_IN	HD_REF_IN	Internal SD	Internal HD
SD_REF_IN	SD_REF_IN	Internal HD	SD_REF_IN	Internal HD
None	Internal HD	Internal HD	Internal SD	Internal HD

<Notes>

zIn the 25 Hz (HD) or 50 Hz (HD) mode, black signals are output from the SD SDI output and analog composite output connectors.

zIn the 25 Hz (SD) or 50 Hz (SD) mode, black signals are output from the HD SDI output and analog component output connectors.

zAll the HD SDI output, SD SDI output, video output, analog component output, audio output and TC output signals are output in phase with the REF input.

Internal HD:

With HD tape playback as the reference, operation uses a 74 MHz clock signal in the free-run mode.

Internal SD:

With SD tape playback as the reference, operation uses a 4fsc clock signal in the free-run mode.

16