Setup menus (continued)

AUDIO (continued)

No./Item

 

Description of setting

 

 

750

For selecting the channel for the signal output to the

ANA CH1/2

analog audio output terminal CH1/CH2.

SEL

0000

CH1/2

 

0001

CH3/4

 

0002

CH5/6

 

0003

CH7/8

 

 

759*1

For selecting the audio output level during DV format

DV PB ATT

playback.

 

0000

OFF :

 

 

The audio output level is not attenuated.

 

0001

ON :

 

The audio output level is attenuated.

 

 

760*1

For selecting whether to mute the sound at the joins

REC PT

in the recording during DV or DVCAM format

playback.

 

MUTE

 

0000

OFF :

 

 

The sound is not muted.

 

0001

ON :

 

The sound is muted.

 

 

762

For setting whether the tape is to be played back

AUD RATE

without passing the signals through the rate converter

CON

(without activating the digital filter) in the digital audio

 

output unit.

 

0000

OFF :

 

The tape is played back without passing the signals

 

through the rate converter.

 

0001

ON :

 

The signals are passed through the rate converter,

 

and the tape is played back.

 

<Note>

 

 

ON/OFF control is exercised for channels 1 through 8

 

at the same time. Separate settings cannot be

 

performed on a channel by channel basis.

 

 

765

For setting whether to output the analog CUE signal

CUE OUT

to CH1/2 for the analog audio output.

SEL

0000

OFF :

 

The analog CUE signal is not output.

 

The PCM audio signal is output when the speed

 

range is less than j1.0k to +1.0k; while the no

 

audio signal is output at any other speed.

 

0001

ON :

 

The analog CUE signal is output.

 

The PCM audio signal is output when the speed

 

range is less than j1.0k to +1.0k; while the

 

analog CUE signal is output at any other speed.

 

 

781*1

For setting the analog audio input impedance.

IN IMP SEL

0000

600 :

600h

 

 

 

 

0001

HIGH :

 

High impedance

 

<Note>

 

 

Regardless of this setting, the impedance is set to

 

3kh. when “–60 dB” is selected as the menu item

 

No.701 to 702 settings.

 

 

 

No./Item

 

Description of setting

 

 

782

Set the channels to multiplex SD-SDI output.

EMBD CH

0000

CH1-4

:

SEL

0001

CH5-8

:

 

<Note>

 

 

 

When tape other than DVCPRO HD (LP) is played,

 

CH1 to CH4 is always multiplexed.

 

 

783

For selecting channels that are adjusted with the

AUDIO CH

audio volume control on the front panel and displayed

SEL

on the audio level meter.

 

0000

CH1-4

:

 

Select CH1–CH4.

 

0001

CH5-8

:

 

Select CH5–CH8.

784Select enabled/disabled for MONITOR SELECT

MONI SEL

button operation on the front panel.

INH

0000

OFF :

 

Operation is enabled.

 

0001

ON :

 

Operation is disabled.

 

0002

ON1 :

 

Operation is disabled in the FULL display mode

 

while the operation is enabled only in the FINE

 

display mode.

*1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to “Menus which are displayed” (page 32).

“_____” indicates the factory setting.

52