Setup (initial settings) (continued)

3 Incline the joystick up and down to adjust the cursor in the default settings screen to the “LOAD” position and press the joystick. The mode for this unit changes to the LOAD mode, the LOAD screen is displayed on the video monitor, and the item name is displayed in the counter display.

SET-UP MENU <LOAD>

¢NO FACTORY USER1(ALL) USER2(ALL) USER3(ALL)

USER1(NOT SYSTEM) USER2(NOT SYSTEM) USER3(NOT SYSTEM)

4 Incline the joystick up and down to adjust the cursor in the LOAD screen to the “FACTORY” position and press the joystick.

zIf this operation is made after moving the cursor to “FACTORY,” values for all menus except the SYSTEM menu will return to the factory settings.

zWhen the cursor is moved to “NO” and this operation is performed, the display returns to the menu screen without restoring the factory settings.

5 The confirmation screen is displayed on the video monitor.

zWhen the PLAY button is pressed, the unit returns to the factory settings and the display of the menu screen disappears.

zWhen the STOP button is pressed, the display returns to the menu screen without changing the settings.

SETUP-MENU <LOAD>

FACTORY OK?

YES<PLAY>/NO<STOP>

Setting the user defaults

1 Press the MENU button.

A select screen for major menu items is displayed on the video monitor, and the names are displayed in the counter display.

2 Follow the procedure described in “Setting method using the on-screen menus” (page 27) 2–6and adjust the desired settings.

3 Press the RESET button.

The mode for this unit will change to the default setting mode, and the default setting screen will be displayed on the video monitor.

SELECT MODE

¢0 ESCAPE

1 LOAD

2 SAVE

3 PROTECT

4 Incline the joystick up and down to adjust the cursor in the default settings screen to the “SAVE” position and press the joystick.

The mode for this unit changes to the SAVE mode, the SAVE screen is displayed on the video monitor, and the item name is displayed in the counter display.

SET-UP MENU <SAVE>

¢NO USER1(ALL) USER2(ALL) USER3(ALL)

USER1(NOT SYSTEM) USER2(NOT SYSTEM) USER3(NOT SYSTEM)

5 Incline the joystick up and down to adjust the cursor on the SAVE screen to the “USER ¢ (ALL)” position (¢ each value from 1 to 3.) and press the joystick.

zWhen storing a set value other than SYSTEM menu in memory, move the cursor to “USER ¢ (NOT SYSTEM)” (¢ each value from 1 to 3.) and press the joystick.

zTo cancel the operation, move the cursor to “NO” and press the joystick.

28