Setup menus (continued)

OPERATION

No./Item

 

Description of setting

 

 

100

To set the transition method to search mode (stick

SEARCH

operation).

ENA

0000

STICK :

 

Shift to the search mode when the SEARCH button

 

is pressed or when the stick is operated.

 

0001

KEY :

 

Do not shift to the search mode unless the

 

SEARCH button is pressed.

 

 

101

For setting the maximum speed in the shuttle mode.

SHTL MAX

0000

X8.4 :

 

8.4k normal speed

 

0001

X16 :

 

16k normal speed

 

0002

X32 :

 

32k normal speed

 

<Note>

 

 

The maximum speed for the HD SP mode is

 

automatically limited to 25k normal speed.

 

 

102

For setting the maximum speed of fast forward or

FF.REW MAX

rewind operations.

 

0000

X16 :

 

16k normal speed

 

0001

X32 :

 

32k normal speed

 

0002

X50 :

 

50k normal speed

 

<Notes>

 

 

z The maximum speed for the HD SP mode is

 

automatically limited to 25k normal speed.

 

z The maximum speed for the DV and DVCAM

 

modes is automatically limited to 32k normal

 

speed.

 

 

 

104

For setting whether a warning is to be displayed when

REF ALARM

the REF VIDEO signal is not connected.

 

0000

OFF :

 

No warning is displayed.

 

0001

ON :

 

A warning is displayed by the flashing STOP lamp.

 

 

105*1

For setting the mode of the VTR, which becomes the

AUTO EE

EE state when menu item No. 140 OUTPUT is set to

“EE.”

 

SEL

 

0000

S/F/R :

 

 

The mode changes to the EE state when this item

 

is set to STOP, FF, or REW.

 

0001

STOP :

 

The mode changes to the EE state only when this

 

is set to STOP.

 

 

106

For setting the output conditions of video images and

EJECT EE

voice when ejecting the tape.

SEL

0000

EE :

 

Both the video and audio signals are always output

 

in the EE (electric modulation to electric playback)

 

mode regardless of the setting of the menu No.140

 

OUTPUT.

 

0001

BLACK :

 

The output status differs according to the setting of

 

the menu No.140 OUTPUT.

 

EE:

The signals are output in the EE mode.

 

TAPE: BLACK is output for the video, and the

 

 

audio is muted.

 

0002

GRAY :

 

The output status differs according to the setting of

 

the menu No.140 OUTPUT.

 

EE:

The signals are output in the EE mode.

 

TAPE: GRAY is output for the video, and the audio

 

<Note>

is muted.

 

 

 

When “23/24” mode, “25 (HD/SD)” mode, or “50 (HD/

 

SD)” mode is selected in menu No. 25 SYSTEM

 

FREQ, BLACK is output if “EE” is selected.

 

 

 

No./Item

 

Description of setting

 

 

107*1

For setting the HD SDI and HD analog component

EE MODE

output signals in EE mode when HD SDI input is

selected.

SEL

0000

NORMAL :

 

 

Signals delayed by the time taken by internal signal

 

processing are output.

 

0001

THRU :

 

Signal processing is not undertaken internally, and

 

the signals are output without delay at their original

 

timing.

 

<Notes>

 

z The superimposed information is not displayed

 

when THRU is used as the setting.

 

z When 1394 or SG is selected for the input signal in

 

edit mode, internal signal is selected forcibly

 

“NORMAL”.

 

 

108

For setting the play rise time in frame increments.

PLAY DELAY

0000

0

 

:

:

 

0015

15

 

 

109*1

For selecting in how many field increments the

CAP. LOCK

playback framing is to be locked.

0000

2F

 

 

0001

4F

 

0002

8F

 

<Notes>

 

z “8F” can be selected only when “50i/25p” is

 

selected as the menu item No.25 SYSTEM FREQ

 

setting.

 

z In the HD LP or HD SP mode, 2F mode is selected

 

when recording and playing back, including editing,

 

regardless of the menu.

 

 

110

For setting whether the tape is to be automatically

AUTO REW

rewound to its beginning when the tape end is detected.

 

0000

OFF :

 

The tape is not rewound.

 

0001

ON :

 

The tape is rewound to its beginning.

 

 

112

For setting the video output when the mode is

FRZ MODE

transferred from playback images to standby OFF

SEL

(half loading) mode or EJECT mode.

 

0000

DIS :

 

The video output is muted.

 

0001

STBOFF :

 

When the standby OFF (half loading) mode is

 

established, the image played back at that moment

 

is frozen and output.

 

0002

SOF&EJ :

 

When in the STANDBY OFF mode and the EJECT

 

mode, the image played back at that moment is

 

frozen and output.

 

<Notes>

 

z The frozen status will be according to the settings

 

in menu No. 604 FREEZE SEL.

 

z In the EJECT mode, the frozen image will be

 

output only when setup No. 106 EJECT EE is the 1

 

(BLACK) or 2 (GRAY) setting.

114For setting the operation of the REC INHIBIT lamp when

REC INH the cassette is set to the erasure prevention status.

LAMP 0000 LIGHT :

The lamp lights.

0001 FLASH : The lamp flashes.

<Note>

When the REC INHIBIT switch on the front panel is set to ON, the REC INHIBIT lamp lights at all times regardless of what setting is selected for this menu item.

*1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to “Menus which are displayed” (page 32).

“_____” indicates the factory setting.

40