Setup menus (continued)

BASIC (continued)

No./Item

Description of setting

006For setting what the information to be superimposed.

DISPLAY

0000

TIME :

SEL

Only the data is displayed.

 

(“Data” refers to the CTL, TC or UB value selected

 

by the COUNTER button.)

 

0001

T&STA :

 

The data and operation status are displayed.

 

0002

T&S&M :

 

The data, operation status and mode are

 

displayed.

 

0003

T&RT :

 

The data and REC TIME are displayed.

 

0004

T&YMD :

 

The data and REC DATE (year/month/day) are

 

displayed.

 

0005

T&MDY :

 

The data and REC DATE (month/day/year) are

 

displayed.

 

0006

T&DMY :

 

The data and REC DATE (day/month/year) are

 

displayed.

 

0007

T&UB :

 

The data and user bits are displayed. The time

 

code is displayed after the user bits when the

 

COUNTER button is set to UB.

 

0008

T&CTL :

 

The data and CTL are displayed. The time code is

 

displayed after the CTL data when the COUNTER

 

button is set to CTL.

 

0009

T&T :

 

The data and time code are displayed.

 

<Notes>

 

zDepending on the format used, the following displays appear for the modes.

<Format>

>

<Display>

DVCPRO HD-LP >

DVCPRO_HD-LP

DVCPRO HD

>

DVCPRO_HD

DVCPRO50

>

DVCPRO_50

DVCPRO

>

DVCPRO

DV

>

DV

DVCAM

>

DVCAM

zWhen T&S&M is selected as the item setting, an error message is superimposed onto the display when a warning or error occurs.

zREC TIME and REC DATE are displayed only during DV or DVCAM playback. The operation mode is displayed with the DVCPRO HD-LP, DVCPRO HD, DVCPRO50 or DVCPRO format.

007

For setting the horizontal position at which the

CHARA

superimposed characters are to be displayed.

H-POS

0000

0

 

:

:

 

0006

6

 

:

:

 

0037

37

 

<Note>

 

 

Press the joystick and tilt up/down and right/left to set

 

the character position.

008For setting the vertical position at which the

CHARA superimposed characters are to be displayed.

V-POS

0000

0

 

:

:

 

0023

23

 

:

:

 

0032

32

 

<Note>

 

 

Press the joystick and tilt up/down and right/left to set

 

the character position.

No./Item

 

Description of setting

 

 

009

For setting the superimposed display and menu

CHARA

display type.

TYPE

0000

WHITE :

 

White characters are displayed on a black

 

background.

 

0001

W/OUT :

 

White characters with black edges are displayed.

 

 

020*1

For setting the format in which to record or play back

SYS FORMAT

the signals including the HD REF signals.

 

0000

1080i :

 

1080i mode

 

0001

720p :

 

720p mode

 

 

022

For setting the format in which to play back the tape.

PB FORMAT

0000

MANUAL :

 

The tape is played back in the format selected by

 

the menu item No.020 SYS FORMAT and No.023

 

FORMAT SEL setting.

 

0001

AUTO :

 

The tape is played back in the format selected by

 

the format in which the tape was recorded.

 

 

023

For selecting the format when “MANUAL” is selected

FORMAT SEL

as the menu item No.022 PB FORMAT setting.

 

0000

HD_LP :

 

The DVCPRO HD-LP format is selected, and the

 

format follows the menu item No.020 SYS

 

FORMAT setting.

 

0001

HD_SP :

 

The DVCPRO HD format is selected, and the

 

format follows the menu item No.020 SYS

 

FORMAT setting.

 

0002

422 :

 

The DVCPRO50 (422) format is selected.

 

0003

411 :

 

The DVCPRO (411) format is selected.

 

0004

DV :

 

The DV format is selected.

 

0005

DVCAM :

 

The DVCAM format is selected.

 

 

 

*1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to “Menus which are displayed” (page 32).

<Note>

When the signal format to be output is set to other than DVCPRO HD and an external device is connected to the DV connector, the following settings are recommended.

zMenu No. 022 PB FORMAT: MANUAL

zMenu No. 023 FORMAT SEL:

Format of the tape that is inserted in the unit

“_____” indicates the factory setting.

38