Panasonic AJ-HD1400E, J-HD1400P UMID information display, Error messages (continued)

Error messages (continued)

If “T&S&M” is selected in the menu No. 008 DISPLAY SEL, a message appears in the modedisplay whenever a warning or error occurs. When multiple events occur, the event with the highest priority is displayed.

Priority	Display	Description
	Error messages	When an operational malfunction has occurred in the unit, the error number flashes and the
High	(See error message table)	error message is indicated on the counter display.
	INT SG	When SG has been selected as the input signal by the INPUT SELECT button, the “INT SG”
		display will appear for the first two seconds at the start of operation (EE mode) when the REC
		button is pressed.
	NO INPUT	If there are no input signals--with the exception of the analog audio signals-- supplied to the
		connectors selected by the INPUT SELECT button, the “NO INPUT” display will appear for the
		first two seconds at the start of operation (EE mode) when the REC button is pressed.
Low	Warning messages	When a warning occurs in this unit, the error number and warning message are indicated on the
		counter display. When multiple warnings occur, the warning with the highest priority is
	(See error message table)
		displayed.

UMID information display

This is displayed when UMID information is present on the input signal in EE mode.

This lamp lights during tape playback when UMID information has been recorded on the tape. “NO-INFO” is displayed when there is no UMID information.

Display		Description
MATNO	Material number
COPY	Instance number (No. of copies)
OWNR	Country, organization, user
	Reception status from GPS satellites when recording spatial coordinates
	(height above sea level, longitude and latitude):
POS	HOLD: No reception from any satellite
	2D:	Reception possible, but number of satellites is insufficient. Height
		above sea level will not be accurate.
	3D:	Good reception
DATE	Date
TIME	UTC (Coordinated Universal Time) and time difference with UTC

60