Panasonic AJ-HD1400E, J-HD1400P EDIT, (continued)

Setup menus (continued)

EDIT

No./Item		Description of setting
302*1	For selecting whether to perform simultaneous
CONFI EDIT	playback during editing.
	0000	OFF :
	Simultaneous playback is not performed.
	0001	ON :
	Simultaneous playback is performed.
303*1	For selecting how to connect the digital audio edit IN
AUD EDIT IN	points.	CUT :
	0000
	Cut processing
	0001	FADE :
	V-fade processing
304*1	For selecting how to connect the digital audio edit
AUD EDIT	OUT points.
	0000	CUT :
OUT
	Cut processing
	0001	FADE :
	V-fade processing
307*1	For selecting the VTR’s mode upon completion of the
AFTER CUE-	cue-up operation.
UP	0000	STOP :
	The VTR is set to the STOP mode.
	0001	STILL :
	The VTR is set to the still picture (SHTL STILL)
	mode.
	0002	STILL2 :
	The VTR is set to the still picture (VAR STILL)
	mode.
320*1	For setting the allocation of the channels for the
EDIT	analog audio presets of a controller when a controller
	without a function to control the edit presets of the
RPLCE1
	digital audio signals is used to edit the digital audio
	signals of the VTR.
	The VTR’s CH1 edit presets are set to ON or OFF
	following the analog audio signals specified by the
	controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	The analog CH1 edit presets are followed.
	0002	CH2 :
	The analog CH2 edit presets are followed.
	0003	CH1+2 :
	The analog CH1 or CH2 edit presets are followed.
321*1	As with menu item No.320, the VTR’s CH2 edit
EDIT	presets are set to ON or OFF following the analog
	audio signals specified by the controller.
RPLCE2
	0000	N-DEF :
	Not set.
	0001	CH1 :
	The analog CH1 edit presets are followed.
	0002	CH2 :
	The analog CH2 edit presets are followed.
	0003	CH1+2 :
	The analog CH1 or CH2 edit presets are followed.
322*1	As with menu item No.320, the VTR’s CH3 edit
EDIT	presets are set to ON or OFF following the analog
	audio signals specified by the controller.
RPLCE3
	0000	N-DEF :
	Not set.
	0001	CH1 :
	The analog CH1 edit presets are followed.
	0002	CH2 :
	The analog CH2 edit presets are followed.
	0003	CH1+2 :
	The analog CH1 or CH2 edit presets are followed.

No./Item		Description of setting
323*1	As with menu item No.320, the VTR’s CH4 edit
EDIT	presets are set to ON or OFF following the analog
	audio signals specified by the controller.
RPLCE4
	0000	N-DEF :
	Not set.
	0001	CH1 :
	The analog CH1 edit presets are followed.
	0002	CH2 :
	The analog CH2 edit presets are followed.
	0003	CH1+2 :
	The analog CH1 or CH2 edit presets are followed.
324*1	As with menu item No.320, the VTR’s CUE edit
EDIT	presets are set to ON or OFF following the analog
	audio signals specified by the controller.
RPLCEC
	0000	N-DEF :
	Not set.
	0001	CH1 :
	The analog CH1 edit presets are followed.
	0002	CH2 :
	The analog CH2 edit presets are followed.
	0003	CH1+2 :
	The analog CH1 or CH2 edit presets are followed.

*1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to “Menus which are displayed” (page 32).

“_____” indicates the factory setting.

44