Panasonic AJ-HD1400E, J-HD1400P VIDEO, (continued)

Setup menus (continued)

VIDEO

No./Item		Description of setting
601*1	For selecting the type of internal standard signals.
VIDEO INT	0000	100%CB :
	A 100% color bar signal is selected.
SG
	0001	75%CB :
	A 75% color bar signal is selected.
	0002	SMPTE :
	An SMPTE color bar signal is selected.
	0003	ARIB :
	An ARIB color bar signal is selected.
	0004	BLACK :
	A black signal is selected.
602*1	For selecting how to process the serial input.
SDI IN MODE	0000	DR_OFF :
	The 8 higher bits whose two lower bits have been
	rounded off are recorded.
	0001	DR_ON :
	The dynamically rounded 8 higher bit signal is
	recorded.
603	For setting whether to mute the video output signal
V-MUTE SEL	when a blank part of the tape is detected during
	playback.
	0000	N-MUTE :
	The video output signal is not muted. (It is frozen.)
	0001	GRAY :
	The video output signal is muted and turned gray.
	0002	BLACK :
	The video output signal is muted and turned black.
	0003	NOISE :
	The video output signal is muted and turned into
	noise.
604	For selecting the freeze mode of the still pictures and
FREEZE SEL	the slow play mode.
	0000	FIELD :
	Field freeze, field slow
	0001	FRAME :
	Frame freeze, frame slow
	<Note>
	For IEEE 1394 digital output, if format conversion is
	not executed, the frames may freeze or slow down
	regardless of the settings in this item.
615*1	For selecting what signals are to be output from the
V OUT SEL	VIDEO OUT1 output connector.
	0000	CMPNT :
	The HD component signals are output.
	0001	CMPST :
	Composite signals are output.
	<Note>
	When the CMPST is selected, the Pb and Pr of the
	analog HD component signals are muted.
619*1	This is used to select the method to process the
V_FILTER	images using the vertical filter during down-
	conversion.
	0000	FIELD :
	The images are processed by field basis.
	0001	FRAME :
	The images are processed by frame basis.
	<Note>
	When “FRAME” has been selected, the resolution is
	improved, but the images may flicker.
620*1	For setting the image processing during down-
DOWNCON	conversion.
	0000	FIT_V :
MODE
	Side cut mode
	0001	FIT_H :
	Letter-box mode
	0002	FIT_HV :
	Squeeze mode

No./Item		Description of setting
621*1	For setting the image processing during up-
UPCONV	conversion.
	0000	FIT_V :
MODE
	Side panel mode
	0001	FIT_H :
	Top and bottom cut-off in vertical direction
	0002	FIT_HV :
	Stretch mode
626*1	For enhancing the horizontal outlines during down-
D/C ENH H	conversion.
	0000	0dB
	0001	+1dB
627*1	For enhancing the vertical outlines during down-
D/C ENH V	conversion.
	0000	0dB
	0001	+1dB
628*1	For enhancing the horizontal outlines during up-
U/C ENH H	conversion.
	0000	0dB
	0001	+1dB
629*1	For enhancing the vertical outlines during up-
U/C ENH V	conversion.
	0000	0dB
	0001	+1dB
630*1	For selecting the HD output signal format during
1080i>	1080i tape playback or in the 1080i EE mode.
	0000	1080i
HD_OUT
	0001	720p
	<Note>
	This item’s setting cannot be changed while a tape is
	being recorded or while the recording pause mode is
	established.
632*1	For selecting the HD output signal format during 720p
720p>	tape playback or in the 720p EE mode.
	0000	1080i
HD_OUT
	0001	720p
	<Note>
	This item’s setting cannot be changed while a tape is
	being recorded or while the recording pause mode is
	established.
636*1	For selecting the HD output signal format during SD
SD>	tape (DVCPRO50, DVCPRO, DV or DVCAM)
	playback.
HD_OUT
	0000	1080i
	0001	720p
650	0000	CMPNT :
STYLE	Level adjustment mode for the component style
	0001	CMPST :
	Level adjustment mode for the composite style

*1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to “Menus which are displayed” (page 32).

“_____” indicates the factory setting.

47