Panasonic AJ-HD1400E, J-HD1400P manual 42

Setup menus (continued)

OPERATION (continued)

No./Item		Description of setting
155*1	For setting whether the recording/stop is executed
AUTO REC	automatically in conjunction with the Recording Mark
	of the HD SDI input signals from our camera recorder
	or not.
	0000	OFF :
	Do not to execute the recording/stop automatically.
	0001	TYPE1 :
	To execute the recording/stop automatically in
	conjunction with the Recording Mark in the LTC
	information added to the HD SDI.
	0002	TYPE2 :
	To execute the recording/stop automatically in
	conjunction with the Recording Mark in the SVITC
	information added to the HD SDI.
	<Notes>
	z Set the LOCAL/REMOTE switch to the REMOTE
	position.
	z For the selection of TYPE 1 or TYPE 2, refer to
	“Our camera recorder, Recording format, and
	Recording Mark.”
	z To select TYPE 1 or TYPE 2 to start recording
	automatically, set this unit to the REC PAUSE
	mode. It may not operate in any mode other than
	the REC PAUSE mode. After accepting the auto
	stop, this unit changes to the REC PAUSE mode.
	z When this unit is recording in normal operation, the
	AUTO REC function is not available.

*1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to “Menus which are displayed” (page 32).

Our camera recorder, Recording format, and Recording Mark

Model	Recording format	Recording	Remarks
		Mark TYPE
AJ-HDC27F, H	720/¢¢p over 60p	TYPE1	ー
AJ-HDX400	1080/59.94i	–*2
AJ-HDX400E	1080/50i	–*2	It is possible to
			switch between
	1080/25p over 50i	–*2
			TYPE 1 and
			TYPE 2. TYPE-1
	720/59.94p	TYPE1
			and TYPE-2 are
	720/23.98p over 59.94p	TYPE1	the initial
			settings for the
	720/29.97p over 59.94p	TYPE1	camera recorder.
			If the unit is used
	1080/59.94i	–*2
			with the TYPE-1
			settings, set the
	1080/23.98p over 59.94i	TYPE2
			UB MODE of the
AJ-HDX900			camera to “FRM
	1080/29.97p over 59.94i	–*2
			RATE”. If it is
			used with the
	1080/50i	–*2
			TYPE-2 settings,
			set the VITC UB
	1080/25p over 50i	–*2
			MODE to “FRM
			RATE.”
	720/50p	TYPE1
	720/25p over 50p	TYPE1

*2 In the initial settings, the Recording Mark is not overlapped on the HD SDI signals.

No./Item		Description of setting
160	For setting the repeat playback mode.
MEMORY	0000	OFF :
MODE	No repeat playback (normal operation).
	0001	M-STOP :
	The tape stops near the BEGIN point when it is fast
	forwarded or rewound.
	0002	REPT1 :
	When the tape reaches the END point, it is
	rewound to the BEGIN point, and stops.
	0003	CONT :
	When the tape reaches the END point, it is
	rewound to the BEGIN point, and plays back, and
	this is done repeatedly.
161	For setting the BEGIN point in the repeat playback
CTL BGN	mode.
or	Either TC or CTL is set as the counter display mode
TC BGN	using the COUNTER button.
	If no mode is set, – – : – – : – – : – – appears, and the
	tape start serves as the BEGIN point.
162	For setting the END point in the repeat playback mode.
END	Either TC or CTL is set as the counter display mode
	using the COUNTER button.
	If no mode is set, – – : – – : – – : – – appears, and the
	tape end serves as the END point.
163	For setting what images are to be output while the
REPT MODE	tape returns to the BEGIN point in the repeat
	playback mode.
	0000	FREEZE :
	The tape returns to the BEGIN point with the image
	played back at the END point still frozen.
	0001	BLACK :
	The tape returns to the BEGIN point while the
	screen remains black.
	0002	MENU :
	The tape returns to the BEGIN point following the
	the settings in menu No. 140 OUTPUT.
	<Note>
	If the tape end is set as the END point when
	“FREEZE” is selected, the playback image will not be
	frozen properly.
	Set the END point to a place within the range where
	images are recorded.

180For setting the type of battery.

BATTERY	0000	NiCd12 :
SEL	Settings for 1 pc. 12 V battery (NEAR: 11.2 V,
	END: 10.6 V)
	0001	NiCd13 :
	Settings for 1 pc. 13 V battery (NEAR: 12.0 V,
	END: 10.6 V)
	0002	NiCd14 :
	Settings for 1 pc. 14 V battery (NEAR: 13.6 V,
	END: 10.6 V)
	0003	S-LION :
	Settings for 1 pc. lithium-ion battery “BP-L90A”.
	(NEAR: 11.7 V, END: 10.6 V)
	0004	I-LION :
	Settings for 1 pc. lithium-ion battery “ENDURA80”.
	(NEAR: 12.9 V, END: 12.4 V)
	0005	TYPE-A :
	Setting for using the battery selected by the menu
	item No.181 TYPE-A NEAR item and No.182
	TYPE-A END item
	0006	TYPE-B :
	Setting for using the battery selected by the menu
	item No.183 TYPE-B NEAR item and No.184
	TYPE-B END item

“_____” indicates the factory setting.

42