Setup (initial settings) (continued)
By switching to the menu protect mode, it is possible to disable the setup menu even if the MENU button on the front panel is pressed.
1 Press the MENU button.
A select screen for the major menu items is displayed on the video monitor, and the names are displayed in the counter display.
2 Press the RESET button.
The unit will switch to the default setting mode, and the default screen will be displayed on the video monitor.
SELECT MODE
¢0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT
1 Press the MENU button when pressing the COUNTER button on the front panel.
A select screen for the major menu items is displayed on the video monitor, and the names are displayed in the counter display.
2 Execute the procedures from 2 to 3 described in the “Menu protection method.”
The unit will be set to the menu protect setting mode, and the display for confirming menu protection will appear on the video monitor.
MENU PROTECT OK?
YES<PLAY>/NO<STOP>
3 Tilt the joystick up/down to move the cursor to the “PROTECT” position on the default screen and then press the joystick.
The unit enters the menu protect setting mode, and the confirmation screen is displayed on the video monitor.
MENU PROTECT OK?
YES<PLAY>/NO<STOP>
4
5 Press the MENU button.
The menu disappears and the unit will switch to the menu protect mode.
zIf the MENU button is pressed while the menu protect mode is set, the message <MENU PROTECT> is displayed on the video monitor and the menu is displayed.
<Note>
To enable ordinary menu operation while the menu protection mode is set, press the MENU button when pressing the COUNTER button on the front panel.
3 Press the STOP button. The menu is displayed.
4 Press the MENU button.
The menu disappears, and the menu protect mode is released.
30