Panasonic AJ-HD1400E, J-HD1400P (continued), System frequency switching, Procedure for shifting the system frequency

Setup (initial settings) (continued)

System frequency switching

<Selection of the record and playback format and the synchronizing signal depends on the operation mode>

NO.25
SYSTEM	Recordable format	Playback permissible format	Synchronized signal
FERQ
	1080/59.94i (HD_LP)	1080/59.94i	HD_REF (59.94Hz, 60Hz)
59/60	720/59.94p (HD_LP)	1080/60i	SD_REF (59.94Hz)
	720/60.00p (HD_LP)	720/59.94p
			According to the setting in menu
	(Only the variable frame rate	720/60.00p
			No. 031 OUT REF.
	signal can be recorded.)	480/59.94i (50M, 25M, DV, DVCAM)
		1080/50i	HD_REF (50Hz)
50i/25P	1080/50i (HD_LP)	720/50p	SD_REF (50Hz)
	720/50p (HD_LP)	576/50i (50M, 25M, DV, DVCAM)
			According to the setting in menu
		576/25p over 50i (50M, 25M, DV)	No. 031 OUT REF.
		1080/23.98p over 59.94i [2:3 mode]
		1080/23.98p over 59.94i [2:3:3:2 advance mode]
23/24	None	720/23.98p over 59.94p	HD_REF (47.96Hz, 48Hz)
		720/24p over 60.00p
		480/23.98p over 59.94i [2:3 mode]
		480/23.98p over 59.94i [2:3:3:2 advance mode]
			HD_REF (50Hz)
25 (HD)	None	720/25p over 60p	SD_REF (50Hz)
			According to the setting in menu
			No. 031 OUT REF.
			HD_REF (50Hz)
25 (SD)	None	720/25p over 60p	SD_REF (50Hz)
			According to the setting in menu
			No. 031 OUT REF.
			HD_REF (50Hz)
50 (HD)	None	720/50p over 60p	SD_REF (50Hz)
			According to the setting in menu
			No. 031 OUT REF.
			HD_REF (50Hz)
50 (SD)	None	720/50p over 60p	SD_REF (50Hz)
			According to the setting in menu
			No. 031 OUT REF.

Procedure for shifting the system frequency

To shift the system frequency execute the following operations.

1 Change the set value of menu item No. 25 SYSTEM FREQ. For the method to change the set value, refer to "Setting method using the on-screen menus" (page 27) . Once the set value is changed, the outer frame of the display part of SYSTEM FREQ and the characters in SYSTEM on the front display panel start flashing.

SYSTEM

59.94 60 50/25PsF

23.98 24

25 50

HD SD

2 Press the MENU button.

3 The confirmation screen is displayed to enable the changed set value.

SETUP-MENU SET OK?

YES<PLAY>/NO<STOP>

System menu item No.25 (SYSTEM FREQ) setting has been changed.

zTo enable the change to set value, press the PLAY button. Then the system resumes and starts again in the selected mode.

zTo disable the change to the set value, press the STOP button. Any other changes in the set up menu items are also disabled.

<Note>

If the system is restarted when a cassette remains in the unit, the cassette will automatically be ejected.

31