Panasonic AJ-HD1400E, J-HD1400P manual 49

Setup menus (continued)

VIDEO (continued)

No./Item		Description of setting
665	For adjusting the setup ( or black) level of the HD SDI,
SETUP LVL	analog component output, SD SDI output and analog
(AJ-HD1400P)	composite output. (–10 o to +10 o)
	50	–10%
BK LVL	:	:
	150	0.0%
(AJ-HD1400E)
	:	:
	250	+10.0%
	<Note>
	This setting takes effect when “CMPST” has been
	selected as the menu item No.650 setting.
676*1	For setting whether to clip what is below the pedestal
BLK CLIP	level for the Y (luminance) signal of composite output
	and SD SDI output.
	0000	OFF :
	What is below the pedestal level is not clipped.
	0001	ON :
	What is below the pedestal level is clipped.
680*1	For selecting ON or OFF for the closed caption signal
CC (F1)	in the first field.
	0000	BLANK :
BLANK*DW
	Forced blanking
	0001	THRU :
	No blanking
681*1	For selecting ON or OFF for the closed caption signal
CC (F2)	in the second field.
	0000	BLANK :
BLANK*DW
	Forced blanking
	0001	THRU :
	No blanking
682*1	This selects the composite output signal in HD mode.
VO SETUP	0000	THRU :
	The signal is output with no setup added.
(HD)*UP
	0001	ADD22L :
(AJ-HD1400P)
	The signal is output from line 22 with a 7.5% setup
	added.
	0002	ADD21L :
	The signal is output from line 21 with a 7.5% setup
	added.
	0003	ADD20L :
	The signal is output from line 20 with a 7.5% setup
	added.
683*1	This selects the composite output signal in SD mode.
VO SETUP	0000	THRU :
	The signal is output with no setup added.
(SD)*DW
	0001	ADD22L :
(AJ-HD1400P)
	The signal is output from line 22 with a 7.5% setup
	added.
	0002	ADD21L :
	The signal is output from line 21 with a 7.5% setup
	added.
	00023	ADD20L :
	The signal is output from line 20 with a 7.5% setup
	added.
684*1	For setting whether to superimpose EDH onto the SD
DW	SDI output.
EDH (SD)*	0000	OFF :
	EDH is not superimposed.
	0001	ON :
	EDH is superimposed.
685*1	For selecting the mode of the edge subcarrier
ESR MODE	reduction (ESR) operation in the playback circuit.
	0000	OFF :
(SD)*DW
	ESR is forcibly turned off.
	0001	AUTO :
	ESR is automatically set to ON or OFF depending
	on the unitÅfs operation.

No./Item		Description of setting
686*1	For selecting the cross color processing during
CCR MODE	playback.
	0000	OFF :
(SD)*DW
	The cross color is output as is.
	0001	ON :
	The cross color can be reduced.
687*1	For selecting whether to superimpose the VIDEO
SDI INDEX	INDEX signal on the SD SDI output signal.
	0000	OFF :
0*DW
	The VIDEO INDEX signal is not superimposed on
	the SD SDI output signal.
	0001	ON :
	The VIDEO INDEX signal is superimposed on the
	SD SDI output signal.
689*1	This is used to select the method to process the
COMP MODE	image compression during recording.
	0000	NORMAL :
	The images are recorded using the regular
	compression processing.
	0001	DARK :
	The images are recorded while minimizing the
	compressed image distortion which arises in the
	dark areas below about 10 IRE (70 mV).
	<Notes>
	z This setting is valid when recording in the 720p
	mode.
	z When “DARK” has been selected, the COMP lamp
	lights.
690*1	This selects whether or not to record the UMID
UMID REC	information on the tape.
	0000	OFF :
	UMID information is not recorded on the tape.
	0001	ON :
	The UMID set in menu No. 691 UMID GEN is
	recorded. If no Basic UMID is available in the input
	signals, a Basic UMID of the unit, which is newly
	generated, is recorded.
	<Note>
	UMID information cannot be rewritten in this unit.
691*1	This selects a UMID that is recorded when menu No.
UMID GEN	690 UMID REC is turned “ON”.
	0000	INT :
	Newly created basic UMID information of this unit
	is always recorded.
	0001	EXT :
	The UMID information of the input signals is
	recorded. If no UMID is available in the input
	signals, a Basic UMID of the unit, which is newly
	generated, is recorded.
	<Note>
	The source pack (of the UMID information) of the
	input signal will be recorded on the tape, regardless
	of this menu’s setting.

*1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to “Menus which are displayed” (page 32).

*UP: With HD output (HD tape playback or up-converted output)

*DW: With SD output (SD tape playback or down-converted output)

“_____” indicates the factory setting.

49