Setup menus (continued)
VIDEO (continued)
No./Item |
| Description of setting | |
|
| ||
692*1 | This sets the line on which the UMID information is to | ||
UMID POS | be superimposed. | ||
0000 | BLANK | ||
| |||
| 0001 | 12L | |
| : | : | |
| 0006 | 17L | |
| : | : | |
| 0008 | 19L | |
| <Notes> |
| |
| z The line selected for the menu item No. 501 VITC | ||
| |||
| be selected for this item. | ||
| z The default settings are not restored even if the | ||
| RESET button is pressed while holding down the | ||
| SEARCH button. | ||
| z Metadata recorded on the tape will be output giving | ||
| UMID information first priority. When metadata is | ||
| output, set to a line other than the original | ||
| multiplexed line or select “BLANK.” | ||
693This selects gamma correction.
GAMMA SEL 0000 | OFF : | ||||
| Gamma correction is not carried out. | ||||
0001 | GAMMA1 : | ||||
| This corrects video images shot with the cine | ||||
| gamma FilmREC mode of the Varicam to images | ||||
| of film quality (equivalent to Telecine 5 of HD | ||||
| Gamma Corrector in | ||||
0002 | GAMMA2 : | ||||
| This corrects video images shot with the cine | ||||
| gamma FilmREC mode of the Varicam to images | ||||
| of film quality (equivalent to Telecine 6 of HD | ||||
| Gamma Corrector in | ||||
0003 | GAMMA3 : | ||||
| This converts video images shot with the cine | ||||
| gamma FilmREC mode of the Varicam into the | ||||
| Cineon curve appropriate for film recording. | ||||
|
|
|
|
|
|
1023 |
|
|
|
| |
|
|
|
| ||
768 |
|
|
|
| |
|
|
|
| ||
512 |
|
| TELECINE5 | ||
| |||||
|
|
|
| TELECINE6 | |
256 |
|
|
|
| |
|
| Cineon | |||
|
| ||||
|
|
|
| ||
|
|
|
|
|
|
256 512 768 1023
<Notes>
zGamma correction is effective in the following conditions.
When the VTR operation mode is VV (TAPE) and 720p is displayed in the system format.
However, during cross convert from 720p > 1080i, gamma correction is not effective for SD output.
zWhen “ON” is selected, the GAMMA lamp on the front panel is on at all times.
zWhen this unit is turned to OFF, this setting returns to "OFF." The setting of user default returns to “OFF.”
zThis item is not effective for 1394 output.
No./Item |
| Description of setting | |
|
| ||
695*1 | For selecting the blanking ON/OFF for a period of | ||
BLANK | vertical blanking on video signals of the SD output. | ||
0000 | BLANK : | ||
LINE*DW | |||
All the lines are forcibly blanked. | |||
| |||
| 0001 | THRU : | |
| None of the lines are blanked. | ||
| 0002 | MANU : | |
| Blanking ON or OFF is selected on a | ||
| basis. | ||
| <Notes> | ||
| z When setting “MANU,” if the STOP button is | ||
| pressed, the screen shifts to the sub screen and | ||
| the ON/OFF setting for each line can be adjusted. | ||
| Press the STOP button again to return to the main | ||
| screen. | ||
| z Lines that are selected as being blanked in this | ||
| menu item are similarly blanked before being up- | ||
| converted when replaying the SD tape. | ||
|
|
| |
|
| Sub screen (59/60 Hz mode) | |
|
|
| |
00 | 0000 | BLANK : | |
LINE 10&273 | Forced blanking | ||
: | 0001 | THRU : | |
12 | No blanking | ||
|
| ||
LINE 22&285 |
|
| |
|
|
| |
|
| Sub screen (50 Hz mode) | |
|
|
| |
00 | 0000 | BLANK : | |
LINE | Forced blanking | ||
7&320 | 0001 | THRU : | |
: | No blanking | ||
|
| ||
15 |
|
| |
LINE 22&335 |
|
| |
|
|
| |
*1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to “Menus which are displayed” (page 32).
*DW: With SD output (SD tape playback or
“_____” indicates the factory setting.
50