Features (continued)

Multi-functional interfaces

zSerial digital input/output

The unit’s HD component serial I/O interface enables interfacing with HD component video signals and 8- channel digital audio signals using a single BNC connector. (SMPTE 292M/296M/299M)

The unit is also equipped with an SD downconverter as a standard feature so that SD component serial signals can be output as well.

(SMPTE 259M-C, 272M-A, ITU-R BT.656-4)

zAnalog video output

Since the unit’s down-converter comes as a standard feature, the analog composite signals can be monitored on an SD monitor.

z9-pin remote

The unit’s 9-pin remote control connector enables it to be operated with an external remote controller.

zIEEE1394 digital input/output

Set to this position when controlling this unit with the AV/

Ccommand of the 9-pin REMOTE, REMOTE of HD SDI, IEEE1394.

<Playback formats and output formats>

Playback format

Output format

 

 

 

 

DVCPRO HD-LP,

DVCPRO HD,

DVCPRO HD

DVCPRO50, DV

 

 

DVCPRO50

DVCPRO50, DV

 

 

DVCPRO

DVCPRO, DV

 

 

DV, DVCAM

DV

In case of EE and REC modes:

zSelect a value other than “1394” with the DVCPRO HD INPUT SELECT button on the front

panel.

<Note>

When any of the settings below is established, no signals will be output from the IEEE1394 digital interface.

zWhen “60/24” is selected as the menu item No.030 HD FREQUENCY setting

zWhen “23/24,” “25 (HD),” “25 (SD),” “50 (HD),” or “50 (SD)” is selected in menu item No. 025 SYSTEM FREQ.

8