7. Answering Machine

7.1Recording your greeting message

The unit has a pre-recorded greeting message for TAM/FAX mode. If you record your own greeting message, it will be played instead of the pre-recorded greeting message when a call is received.

The maximum recording time of your greeting message is either 16 seconds (default) or 60 seconds. We recommend you record a message of less than 12 seconds to make it easier to receive faxes.

Make sure feature #77 is set to TAM/FAXbeforehand (page 49).

hang up. Re-record your greeting message to inform the caller that the unit will not record any incoming messages.

To check the greeting message

Press {GREETING CHECK}.

LThe unit will play the greeting message.

7.1.1Erasing your recorded greeting message

1{GREETING CHECK}

LTo cancel erasing, press {STOP}. 2 {ERASE}

Note:

LIf you erase your TAM/FAX greeting message, the pre-recorded greeting message will be played when a call is received.

{MIC}

{ERASE}

{SET}

{GREETING CHECK}

{GREETING REC}

{STOP}

1{GREETING REC} i{SET} L A long beep will sound.

2Speak clearly about 20 cm (8 inches) away from

{MIC}.

3When finished recording, press {STOP}.

Note:

LYou can change the maximum TAM/FAX greeting message recording time to 60 seconds (feature #54 on page 48).

If you change the setting to 60 seconds, we

recommend that you tell the caller in your TAM/FAX greeting message to press *9 before starting the fax transmission.

If you change the setting from 60 seconds to 16 seconds, your current greeting message will be deleted. The pre-recorded greeting message will be played when a call is received.

LIf you change the maximum recording time of incoming messages to GREETING ONLY(feature #10 or feature 062 on page 44), the unit will answer a call with your current greeting message, and then

39

Page 39
Image 39
Panasonic KX-FG2451 manual Recording your greeting message, Erasing your recorded greeting message