Panasonic KX-FG2451 manual Incomplete, Display

	10. Help
Display	Cause & Solution
“INCOMPLETE”	L The phonebook copy stopped because the destination cordless handset
	was out of range. Press {STOP} to clear the message.
“MEMORY FULL”	L When making a copy, the document being stored exceeded the memory
	capacity of the unit. Press {STOP} to clear the message. Divide the
	document into sections.
“MESSAGE FULL”	L There is no room left in memory to record voice messages. Erase
	unnecessary messages (page 40, 41).
“MODEM ERROR”	L There is something wrong with the unit’s modem. Contact our service
	personnel.
“NO FAX REPLY”	L The other party’s fax machine is busy or has run out of recording paper. Try
	again.
“NO ITEMS STORED”	L You tried to copy your phonebook items to the cordless handset, but your
	phonebook was empty.
“OPEN CABINET	L Please use genuine Panasonic replacement film (page 7).
CHECK FILM SLACK”	L The ink film is slack. Tighten it (see step 5 on page 11).
“OPEN CABINET	L The fax machine is positioned near appliances such as TVs or speakers
CHECK FILM TYPE”	which generate an intense magnetic field.
“PAPER JAMMED”	L A recording paper jam occurred. Remove the jammed paper (page 63).
	L You forced the recording paper into the paper tray too strongly. Remove all
	of the installed paper, and re-install it gently.
“PHONEBOOK FULL”	L There is no space to store new items in the phonebook. Erase unnecessary
	items (page 23).
	L The phonebook memory of the cordless handset is already full, or became
	full when copying phonebook items. Copying was stopped. Press {STOP}
	to exit the mode (page 24). Erase other stored items in the cordless handset
	phonebook (page 23), then try again.
“PLEASE WAIT”	L The unit is checking that there is no slack or crease in the ink film. Wait for
	a moment while the check is completed.
“RECORDING ERROR”	L You recorded your greeting message or memo message less than 1 second
	in length and recording has failed. Try again.
“REDIAL TIME OUT”	L The other party’s fax machine is busy or has run out of recording paper. Try
	again.
“REMOVE DOCUMENT”	L The document is jammed. Remove the jammed document (page 64).
	L Press {STOP} to eject the jammed paper.
“SERIAL ERROR”	L There is something wrong with the unit and the base unit will not work.
	Contact our service personnel.
“TRANSMIT ERROR”	L A transmission error occurred. Try again.
	L If you send a fax overseas, try the following:
	– Make sure the other party’s number is a fax number.
	– Use the overseas transmission mode (feature #23 on page 46).
	– Add 2 pauses at the end of the telephone number or dial manually.
“UNIT OVERHEATED”	L The unit is too hot. Stop using the unit for a while and let the unit cool down.

10.2.2 Cordless handset

Display

“Busy”

Cause & Solution

LThe called base unit is in use.

For assistance, please visit http://www.panasonic.com/consumersupport 55