2. Preparation
17
For assistance, please visit http://www.panasonic.com/consumersupport
Volume
2.5 Adjusting cordless handset volumeRinger volume
1. {MENU}i{1}{1}
2. Press {0} to {3} to select the desired volume.
{1} Low
{2} Medium
{3} High
{0} Off
3. {Save} (soft key 1)
To turn the ringer OFF
Press {0} to display “Off ?” in step 2.
LThe cordless handset will not ring for outside calls.
The cordless handset will ring at the low level for
intercom calls.
LTo turn the ringer back ON, press {1},{2} or {3} in
step 2.
To turn the ringer OFF temporarily
While the cordless handset is ringing for an outside call,
you can turn the cordless handset ringer OFF
temporarily by pressing {OFF}.
Ringer tone
LYou can select the cordless handset ringer tone from
one of 7 patterns for outside calls (feature 12 on page
45).
Cordless handset receiver volume
While using the receiver, press {V} or {^}.
Speaker volume
While using the speakerphone, press {V} or {^}.
2.6 Adjusting base unit volumeRinger volume
While the unit is idle, press {A} or {B}.
LIf there are any documents in the document
entrance, you cannot adjust the volume. Confirm that
there are no documents in the entrance.
To turn the ringer OFF
Press {B} repeatedly to display “RINGER OFF= OK?”.
i{SET}
LThe base unit will not ring for outside calls.
The base unit will ring at the low level for intercom
calls.
LTo turn the ringer back ON, press {A}.
Ringer tone
LYou can select the base unit ringer tone from one of
3 patterns for outside calls (feature #17 on page 45).
Speaker volume
While using the speakerphone, press {A} or {B}.
{OFF}
{MENU}
{^}{V}
1
{SET}