Started Getting
Setting up
You can calculate projection dimensions other than those in the above table from the projection screen size SD (m) using the formula below.
All units are meters. (Values obtained using the formula below contain a slight error.) If the projection screen size is assumed to be SD,
| 16:9 size | 2.35:1 size |
Projection screen height (SH) | = SD (m) × 0.490 | = SD (m) × 0.392 |
Projection screen width (SW) | = SD (m) × 0.872 | = SD (m) × 0.920 |
Minimum distance (LW) | = SD (m) × 1.1503 − 0.056 | = SD (m) × 1.2169 − 0.054 |
Maximum distance (LT) | = SD (m) × 2.2951 − 0.041 | = SD (m) × 2.4248 − 0.037 |
Front adjustable feet and throwing angle
Install the projector on a flat surface with its front side become parallel to the screen surface so that the screen becomes rectangle.
If the screen is tilted towards the bottom, extend the adjustable feet to make a rectangle screen. If the projector is tilted horizontally, use the adjustable feet to level the projector.
As shown in the diagram, the feet can be extended by turning the front adjustable feet, and can be retracted by turning in the opposite direction.

Attention
zzHot air is expelled from the air exhaust port. Do not touch the air exhaust port ( page 18) directly when you adjust the front leg adjustable feet.
Note
zzTighten the front adjustable feet until you hear them click into place.
22 - ENGLISH