Maintenance
Troubleshooting
See the relevant page for details.
Problem | Cause | Page | |
|
|
| |
| zzThe power cord may not be connected. | 27 | |
Power does not turn | zzThe <MAIN POWER> switch is turned <OFF>. | 28 | |
zzThe wall outlet may not be supplying electricity. | — | ||
on. | zzThe circuit breakers may have tripped. | — | |
| zz<TEMP> indicator or <LAMP> indicator is illuminated or flashes. | 71 | |
| zzThe lamp unit may not have been installed correctly. | 77 | |
|
|
| |
| zzThe signal input source may not be connected to a terminal properly. | 25 | |
| zzThe input selection setting may not be correct. | 33 | |
No picture appears. | zzThe [BRIGHTNESS] adjustment setting may be at the minimum setting. | 37 | |
zzThe external device connected to the projector may not be functioning correctly. | — | ||
| |||
| zzThe [BLANK] function may be in use. | 70 | |
| zzThe lens cover may still be attached to the lens. | 18 | |
|
|
| |
| zzThe lens focus may not have been set correctly. | 30 | |
The picture is fuzzy. | zzThe projector may not be at the correct distance from the screen. | 21 | |
zzThe lens may be dirty. | 18 | ||
| |||
| zzThe projector may be over tilted. | 21 | |
|
|
| |
The color is pale or | zz[COLOR] and [TINT] may not be adjusted correctly. | 37 | |
grayish. | zzThe device connected to the projector may not be adjusted correctly. | — | |
|
|
| |
| zzThe batteries may have run out. | — | |
The remote control | zzThe batteries may not have been inserted correctly. | 17 | |
zzThe remote control signal receiver on the projector may be obstructed. | 17 | ||
does not work. | |||
zzThe remote control may be out of the range of operation. | 17 | ||
| |||
| zzFluorescent lights may be interfering. | — | |
|
|
| |
The picture does not | 52, 53 | ||
zzThere may be a problem with the VCR or other signal source. | — | ||
display correctly. | |||
zzA signal which is not compatible with the projector is being input. | 86 | ||
| |||
|
|
| |
| zzThe cable may be too long. (Cable must be less than 10 m in length.) | — | |
Picture from a | zzThe external video output from a personal computer may not be correct. | — | |
(You may be able to change the external output settings by pressing the [Fn] + |
| ||
computer |
| ||
[F3] or [Fn] + [F10] keys simultaneously. The actual method varies depending on |
| ||
does not appear. |
| ||
the type of computer; refer to the documentation provided with your computer for |
| ||
| further details.) |
| |
|
|
| |
Video from HDMI | zzThe HDMI cable is not fully inserted. | 26 | |
compatible device | zzTurn the power for the projector and the external device off and on. | 27 | |
does not appear or it | zzA signal which is not compatible with the projector is being input. | 86 | |
appears jumbled. |
|
| |
|
|
|
* If the projector still does not work correctly after checking the points above, contact your dealer.
80 - ENGLISH