Switching the projector on/off
Attention
zzThe internal fan operates and cools the projector while it is preparing to power off (when the power indicator is illuminated orange). Do not switch the main power off or remove the power cord.
Note
zzWhen the power < / > button is pressed while the projector is in the power off preparation mode, it may take some time to enter projection mode.
zzThe projector consumes approx. 0.08 W of electrical power even when the power is off (when the power indicator is illuminated red).
zzPower consumption when the power indicator flashes red is almost the same as when the lamp is illuminated red.
Switching on the projector
Check external device connections before switching the projector on.
|
| 3) |
Power indicator |
5)
4)
Operation Basic
1111Connect the power cord to the projector.
2222Connect the power plug to an outlet.
3333Press the <ON> side of the <MAIN POWER> switch to turn on the power.
zzThe power indicator illuminates or flashes red.
4444Remove the lens cover.
zzBe sure to remove the lens cover before starting projection.
5555Press the power < / > button.
zzThe power indicator illuminates green after flashing for a while and projection starts.
Attention
zzUsing the projector while the lens cover is attached causes the device to heat up and can result in a fire.
Note
zzWhen starting up the projector, a small rattling sound may be heard or when the luminous lamp is lit a tinkling sound may be heard, but this is not a malfunction.
zzDuring video projection, the cooling fan operates and makes a sound. This fan sound may change with ambient temperature and becomes louder when the lamp is turned on.
zzSetting the [LAMP POWER] in the [OPTION] menu to [ECO] reduces operation sounds. ( page 66)
zzWhen the lamp is turned off and immediately turned back on again, the video may temporarily flicker slightly at the start of projection due to lamp characteristics. This is not a malfunction.
28 - ENGLISH