■■[MOTION EFFECT]
Videos with a lot of movement can also be viewed sharply.
Switch settings | Switch settings | |
|
|
|
[OFF] |
| MOTION EFFECT inactive |
[ON] |
| MOTION EFFECT active |
Note
zzThe effect on the video may be difficult to see in some cases.
■■[COLOR MANAGEMENT]
For the selected [PICTURE MODE], you can adjust a selected color individually with [CURSOR] mode or adjust the six color components (Red, Green, Blue, Cyan, Magenta, Yellow) with [RGBCMY] mode.
Adjustment results can be saved as a profile and called later.
●Create a new profile
Note
zz[COLOR MANAGEMENT] will be unable to adjust with the setting of [REC709] in [PICTURE MODE], when HDMI signal is selected.
zzWhen the input signal is switched while adjusting, adjustment details are not saved.
zzIf there is another area, which has the exact same or similar color as the target on the same screen, these colors will be adjusted as well.
zzYou can adjust all colors except white, gray and black. zzIf you edit a single color to be individual different colors,
the desired color may not be achieved.
[PICTURE] menu
zzAdjusting the selected color (when [CURSOR] is selected for [ADJUSTMENT MODE])
Select the desired color with a cursor and adjust.
1111 Press the ◄► buttons to select [CURSOR] in [ADJUSTMENT MODE].
2222 Press the ▲▼ buttons to select [START ADJUSTMENT] and press the <ENTER> button.
zzThe cross cursor (A) is displayed, and the projected image is captured.
 Screen
3333 Move the cursor with the ▲▼◄► buttons to the required place to select a color.
zzAlign the center of the cross cursor on the point in the projected image to be adjusted.
4444 Press the <ENTER> button.
zz[CURSOR] menu (B) and the color selected (C) are displayed.
CURSOR
ENTER | DEFAULT | COLOR | 0 |
| TINT | 0 | |
SELECT |
| ||
| RETURN | BRIGHTNESS | 0 |
|
|
|
 Screen
Note
zzIn some cases you may be unable to adjust when the very edge point of the projection area is selected.
zzYou can create a profile only when [ADJUSTMENT MODE] is set to either [CURSOR] or [RGBCMY]. A profile cannot be created from both adjustments.
zzWhite, gray and black cannot be edited.
Settings
ENGLISH - 47