Specifications
The following table describes the specifications of the projector.
Power supply |
| AC100 V - 240 V .50 Hz/60 Hz |
| |
Power consumption | Less than 350 W |
| ||
During standby (when fan is stopped): 0.08 W | ||||
|
| |||
Amps |
| 4.2 A - 1.5 A |
| |
| Panel size (diagonal) | 18.7 mm (0.74") |
| |
| Aspect ratio | 16 : 9 |
| |
LCD panel | Display method | 3 transparent LCD panels (RGB) |
| |
| Drive method | Active matrix method |
| |
| Pixels | 2 073 600 (1 920 x 1 080) x 3 panels | ||
Lens |
| Manual zoom (2x)/Manual focus |
| |
| F 2.0 - 3.4, f 21.5 mm - 43.0 mm |
| ||
|
|
| ||
Lamp |
| UHM lamp (280 W) |
| |
Luminosity*1 |
| 2 800 lm |
| |
|
|
| 0 °C - 40 °C (32 °F - 104 °F) | |
|
| Temperature | When [HIGH ALTITUDE MODE] | |
Operating environment | ( page 66) is set to [ON]: 0 °C - | |||
| ||||
|
|
| 35 °C (32 °F - 95 °F) | |
|
| Humidity | 20% - 80% (no condensation) | |
| Horizontal scanning | 15 kHz - 74 kHz |
| |
Scanning | frequency |
| ||
|
| |||
Vertical scanning |
|
| ||
frequency*2 | 24 Hz - 85 Hz |
| ||
(for RGB signal) | frequency |
| ||
|
| |||
| Dot clock frequency | Less than 154 MHz |
| |
COMPONENT (YPBPR) signals | 525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, | |||
750 (720)/50p, 1 125 (1 080)/60i, 1 125 (1 080)/50i, | ||||
|
| 1 125 (1 080)/60p, 1 125 (1 080)/50p, 1 125 (1 080)/24p | ||
Color system |
| 7 (NTSC/NTSC | ||
Projection size |
| 1.02 m - 7.62 m (40" - 300") |
| |
Projection distance | 1.1 m - 17.5 m (3'8" - 57'3") (16:9 size) | |||
Screen aspect ratio | 16 : 9 |
| ||
Installation |
| FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING | ||
| (Menu selection method) |
| ||
|
|
| ||
****Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
****For details of video signals that can be projected with this projector, see the “List of compatible signals” ( page 86).
Appendix
90 - ENGLISH