■■[POWER ON LINK]
Specify whether or not to switch the power of the projector on when it is in standby by operating external devices.
Switch settings | Switch settings | |
|
| |
[NO] | Inactive | |
|
| |
[YES] | Switch projector power on along | |
with external devices | ||
| ||
|
|
Note
zzDepending on the external device, the projector may automatically turn on when some functions of the connected devices are used. (Only in standby)
zzDue to the projector’s characteristics, it takes time before projection begins. Please be aware that video may already have started by the time the projector is operating fully.
■■[POWER OFF LINK]
Specify whether to switch the power off for external devices when this projector is set to standby.
Switch settings 
Switch settings
Switch the power of external
[YES] devices off along with this projector
Do not switch the power of
[NO] external devices off along with this projector
Note
zzThis function works even if the projector enters standby mode automatically through the [SLEEP] function.
zzThere are cases where some external devices may not be switched off depending on their status (currently recording etc.)
[OPTION] menu
■■[ENERGY SAVING MODE]
Specify whether or not to switch the mode of external devices to the mode with minimum power consumption when the projector is set to standby.
Switch settings | Switch settings | |
|
| |
[QUICK | Do not switch | |
START] | ||
|
Switch the mode of external
[SAVE] devices to the mode with minimum power consumption
Note
zzThis function works when [POWER OFF LINK] is set to [YES].
zzDepending on the external devices, when the projector is turned on power consumption may increase even in [ENERGY SAVING MODE] mode in order to achieve faster start up.
■■[UNUSED DEVICE ENERGY SAVE]
Specify whether or not to keep the power on for external devices selected for input and switch the power off for external devices not selected for input.
If you select [YES (WITH PROMPT)], a message is displayed before the function operates.
Switch settings 
Switch settings
[NO (STAY | Maintain the power on state of | Settings |
| ||
devices for which input is not |
| |
ON)] |
| |
selected |
| |
|
| |
|
|
|
[YES (WITH | After a confirmation message is |
|
displayed, devices for which the |
| |
PROMPT)] | input is not selected are set to |
|
| standby mode |
|
[YES (NO | Devices for which the input is not |
|
PROMPT)] | selected are set to standby mode |
|
|
|
|
Note
zzThis function may not work properly depending on the external device.
ENGLISH - 69