Panasonic PT-AR100U [OPTION] menu

[OPTION] menu

Select [OPTION] from the main menu of “Navigating through the menu” ( page 34), and choose an item from the submenu.

zzSelect item and use the ◄ ► buttons to switch the settings.

Remote control Projector controls

[ON-SCREEN DISPLAY]

This enables setup related to on-screen display.

Press the <ENTER> button.

zzThe [ON-SCREEN DISPLAY] menu is displayed.

PICTURE	ON-SCREEN DISPLAY
	INPUT GUIDE	DETAILED
POSITION	OSD DESIGN	TYPE1
	OSD POSITION	CENTER
LANGUAGE
OPTION

■■[INPUT GUIDE]

Set the display method for the currently selected input port name. This is displayed in the top right of the screen when the <INPUT SELECT> button is pressed. ( page 33)

Switch settings Switch settings

[DETAILED]	Display the input terminal
	graphically
[OFF]	Turn off the guidance
[SIMPLE]	Display the name of input
	terminal only

[OPTION] menu

■■[OSD DESIGN]

Set the color of the on-screen menu.

Switch settings	Switch settings
[TYPE1]	Display using normal design
[TYPE2]	Display using black and white
	design

■■[OSD POSITION]

You can change the displaying position of the on-screen menu.

Switch settings Switch settings

[CENTER]	Display in the center of the
	projection screen
[LOWER LEFT]	Display in the bottom left
	of the projection screen
[LOWER CENTER]	Display in the bottom
	center of the projection
	screen
[LOWER RIGHT]	Display in the bottom right
	of the projection screen
[UPPER LEFT]	Display in the upper left of
	the projection screen
[UPPER CENTER]	Display in the upper center
	of the projection screen
[UPPER RIGHT]	Display in the upper right
	of the projection screen

[BACK COLOR]

Set the color of the projection screen when no signal is input.

Switch settings Switch settings

[BLUE]	Display the whole projection
	screen blue
[BLACK]	Display the whole projection
	screen black

Settings

ENGLISH - 63