Panasonic PT-AR100U manual 64

Settings

[OPTION] menu

[STARTUP LOGO]

You can switch the Panasonic logo that is displayed when starting up the projector on/off.

Switch settings Switch settings

[ON] Active

[OFF] Inactive

Note

zzThe logo Panasonic is displayed for 15 seconds.

[AUTO SEARCH]

Sets whether to automatically search for terminals that have an input signal when the projector is turned on.

Switch settings Switch settings

[ON] Active

[OFF] Inactive

Attention

zzSet this to [ON] under normal circumstances.

zzWhen no signal is detected, the last used input will be selected.

[HDMI SIGNAL LEVEL]

If video is not displayed correctly when this projector is connected to an external device via an HDMI connection, switch the settings.

Switch settings Switch settings

[NORMAL]	Signal level used by general
	external devices
[EXPAND]	Expanded signal level used by
	some devices

Note

zzThis may not work correctly with some external devices, and problems such as video not being displayed may occur.

[FRAME RESPONSE]

Switch this setting when a progressive signal is input and you wish to reduce the time taken from the signal being input to the video being displayed on the screen.

Switch settings Switch settings

[NORMAL] Prioritizes the image quality

[FAST] Prioritizes the frame response

Note

zz[NORMAL] allows higher quality image viewing.

[PROJECTION METHOD]

Set the projection method according to the projector installation status. Change the projection method if the screen is displayed upside down or the display is reversed. ( page 20)

Switch settings Switch settings

[FRONT/DESK]	When setting on a desk/floor and
	projecting from the front
[FRONT/	When using the ceiling mount
	bracket (optional accessory) and
CEILING]
	projecting from the front
[REAR/DESK]	When setting on a desk/floor and
	projecting from the rear (using a
	translucent screen)
[REAR/	When using the ceiling mount
	bracket (optional accessory) and
CEILING]	projecting from the rear (using a
	translucent screen)

64 - ENGLISH