22222Press the <MENU> button to display the menu screen and select [OPTION] with the ▲▼ buttons.
22222Press the <ENTER> button and select [LAMP RUNTIME] with the ▲▼ buttons.
22222Hold the <ENTER> button down for 3 seconds.
zzThe confirmation message is displayed.
LAMP RUNTIME
LAMP RUNTIME RESET.
OK CANCEL
22222Select [OK] with the ◄ ► buttons and then press the <ENTER> button.
zzLAMP RUNTIME is reset to “0”, and the projector powers off. After a short while, the projector enters standby mode.
■■Attaching the top cover
Hold the top cover as shown in the diagram below, align the hinge with the support, and while pushing the arm in the direction of the arrow (towards the inner side of the projector), push it into the groove.
Arm
Support
Hinge Groove
Care and replacement
Maintenance
ENGLISH - 79