Remote control operation Remote control operation



You can operate the projector with the remote control within a range of 7 m (23').

zzOperating by pointing at the projector

Ensure the remote control transmitter is facing the remote control signal receiver on the front of the projector during use.

zzFacing to the screen

Ensure the remote control transmitter is facing the screen and press the required buttons to operate the projector. The signal will be reflected off the screen. The operating range may differ due to the screen material. This function may not be effective with a translucent screen.

Note

zzDo not let strong light shine onto the signal receiver. The remote control may malfunction under strong light such as fluorescent light.

zzIf there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate correctly.

Illuminating button lights

You can illuminate the button lights on the remote control.

Press

Press the <LIGHT> button again to extinguish the button lights.

Note

zzButton lights dim if no actions are carried out for approximately 5 seconds, and then extinguish if no actions are carried out for a further 5 seconds.

zzAfter the button lights have automatically extinguished, they automatically illuminate again if any button is pressed.

(If the <LIGHT> button is pressed within 10 seconds of illuminating, the button lights extinguish and do not automatically illuminate even if another button is pressed.)

Selecting the picture mode

You can switch to your desired picture mode settings.

Press

The settings change as follows each time the button is pressed.

[NORMAL] [DYNAMIC] [GAME] [SPORTS]

[VIVID CINEMA]

 

 

 

[CINEMA1]

 

 

 

[REC709]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

zzYou can also switch the picture mode settings using the on-screen menu.

For details see [PICTURE MODE] in the [PICTURE] menu. ( page 37)

Adjusting the picture

Switchable setting items from the [PICTURE] menu of the on-screen menu can be displayed in a list.

Press

Press the button to switch between [PICTURE] menu and [ADVANCED MENU] menu. Press ▲ ▼ to select the required menu item and ◄ ► to adjust.

zz[PICTURE] menu items

[PICTURE MODE], [CONTRAST], [BRIGHTNESS], [COLOR], [TINT], [COLOR TEMPERATURE], [SHARPNESS ] and [DYNAMIC IRIS]

zz[ADVANCED MENU] menu items

[GAMMA HIGH], [GAMMA MID], [GAMMA LOW], [CONTRAST], [BRIGHTNESS], [NR], [MPEG NR], [MOTION EFFECT], [x.v.Color], [DETAIL CLARITY], [CINEMA REALITY], [TV-SYSTEM], [RGB/YCBCR] and [RGB/YPBPR]

Note

zzFor details regarding the adjustment method, see the [PICTURE] menu ( page 37) and the [ADVANCED

MENU] menu ( page 42).

zzPress the <RETURN> or <MENU> button or wait for 7 seconds without performing any operation to clear the adjustment screen.

zzSet the [ADJUSTMENT MODE] to [SIMPLE] for adjusting [GAMMA HIGH], [GAMMA MID], and [GAMMA LOW] ( page 42).

zzThe items for [SHARPNESS] that can be adjusted differ depending on the [ADJUSTMENT MODE].

[SIMPLE]: [SHARPNESS]

[ADVANCED]: [H-SHARPNESS] [V-SHARPNESS]

Basic Operation

ENGLISH - 31