Settings
[OPTION] menu
■■[SLEEP]
Set the time for the power to be automatically turned off.
Switch settings | Switch settings |
[OFF] Inactive
[60MIN.] Turn power off after 60 minutes
[90MIN.] Turn power off after 90 minutes
[120MIN.] Turn power off after 120 minutes
[150MIN.] Turn power off after 150 minutes
[180MIN.] Turn power off after 180 minutes
[210MIN.] Turn power off after 210 minutes
[240MIN.] Turn power off after 240 minutes
Note
zzThe projector automatically enters power off preparation mode (the power indicator illuminates orange), and then enters standby mode (the power indicator illuminates or flashes in red). ( page 27)
zz3 minutes before
zzIf [SLEEP] mode is set to [OFF] mode before the specified time has elapsed the settings are erased.
[FUNCTION BUTTON]
Display the function currently assigned to the <FUNCTION> button of the remote control. Also, cancel the assigned function.
■■How to cancel function assignment
1111 Press the <ENTER> button.
zzThe [FUNCTION BUTTON] confirmation message is displayed.
FUNCTION BUTTON
FUNCTION BUTTON IS DISABLED.
OK CANCEL
2222 Select [OK] with the ◄ ► buttons.
3333 Press the <ENTER> button.
Note
zzSee “Using the <FUNCTION> button” in “Remote control operation” regarding allocating operations to the <FUNCTION> button. ( page 33)
[VIERA LINK SETTINGS]
Configure VIERA Link.
Press the <ENTER> button.
zzThe [VIERA LINK SETTINGS] confirmation message is displayed.
|
| PICTURE |
| VIERA LINK SETTINGS |
|
|
|
| VIERA LINK | ON | |
|
|
|
|
|
|
|
| POSITION |
| POWER ON LINK | NO |
|
|
| |||
|
|
| POWER OFF LINK | NO | |
|
|
|
|
|
|
|
|
|
| ENERGY SAVING MODE | QUICK START |
|
| LANGUAGE |
| UNUSED DEVICE ENERGY SAVE | NO (STAY ON) |
|
| OPTION |
| VERSION : HDAVI Control 5 |
|
|
|
|
|
|
■■[VIERA LINK]
Set whether the VIERA Link control is active.
Switch settings 
Switch settings
[ON] Active
[OFF] Inactive
When [VIERA LINK] is [ON], the following settings can be made.
[POWER ON LINK]
[POWER OFF LINK]
[ENERGY SAVING MODE]
[UNUSED DEVICE ENERGY SAVE]
68 - ENGLISH