Submenu
When the VIERA Link control is enabled, the function menus of external devices can be displayed.
( page 82)
Furthermore, points for a gamma adjustment can be altered. ( page 42)
Press 
Switching the input signal
The input for projection can be switched.
Press 
The settings change as follows each time the button is pressed.
[COMPONENT IN]
[COMPUTER IN] |
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
[HDMI 2 IN] |
|
|
| [VIDEO IN] | |||||||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| [HDMI 1 IN] |
|
|
|
| |||
|
|
|
|
|
|
|
| ||||
|
|
|
|
| |||||||
[COMPONENT | COMPONENT signals (YCBCR/ | ||||||||||
YPBPR) from the device connected | |||||||||||
IN] | to COMPONENT IN. | ||||||||||
|
|
|
| ||||||||
connected to | |||||||||||
|
|
|
| ||||||||
[VIDEO IN] | VIDEO signal from the device | ||||||||||
connected to VIDEO IN. | |||||||||||
|
|
|
| ||||||||
[HDMI 1/2 IN] | HDMI signal from the device | ||||||||||
connected to |
|
|
|
| |||||||
|
|
|
| HDMI IN 1/HDMI IN 2. | |||||||
|
|
|
| RGB signal and |
|
|
|
| |||
[COMPUTER IN] | COMPONENT signals (YCBCR/ | ||||||||||
YPBPR) from the device connected | |||||||||||
|
|
|
| to COMPUTER IN. | |||||||
When [INPUT GUIDE] on the [OPTION] menu is set to [DETAILED] ( page 63), graphical guidance will be displayed on the upper right of the projected image, and the currently selected input terminal can be checked. (The selected input method will be highlighted in yellow.)
Press the button several times or press ▲ ▼ ◄ ► to cycle through the input methods.
It may take time for the video to change after switching input.
Remote control operation
Attention
zzInput a signal noted in the “List of compatible signals”. ( page 86)
Note
zzSee “Connecting terminals” regarding input ports. ( page 19)
zzIf no operations are performed for approximately 3 seconds, the input guidance display automatically disappears.
zzIf a port that has no input is selected, the whole input port graphic flashes. This graphic is displayed until an input is present.
Using the <FUNCTION> button
Functions used often can be allocated to the <FUNCTION> button on the remote control and this can be used as a short cut button.
Press 
■■Allocating operations to the <FUNCTION> button
1111 Press the <MENU> button in the controls of the projector or on the remote control to display the menu items for allocation (main menu, submenu, or detailed menu).
zzFor how to use the
2222 Hold the <FUNCTION> button on the remote control down for at least 3 seconds.
zzAfter setup is complete the allocated menu items are displayed under the
Note
zzWhile the menu is displayed, the projector does not operate even when the button is pressed.
Displaying the [ECO
MANAGEMENT] menu
The settings screen for ECO MANAGEMENT can be displayed. ( page 67)
Press 
Basic Operation
ENGLISH - 33