Chapter
[DISPLAY SETTING]
Overlap the security message (text or image) over the projecting image.
1)Press as to select [DISPLAY SETTING].
2)Press qw to switch the item.
ff The items will switch each time you press the button.
[OFF] | The text display is disabled. |
[TEXT] | The text display is enabled. |
[USER LOGO] | Displays the image registered by the user. |
Note
ff To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLAY SETTING].
1)Press as to select [TEXT CHANGE].
2)Press the <ENTER> button.
ff The [TEXT CHANGE] screen is displayed.
3)Press asqw to select the text, and press the <ENTER> button to enter the text.
4)Press asqw to select [OK], and press the <ENTER> button.
ff The text is changed.
[MENU LOCK]
Display the menu by the <MENU> button and set whether or not to enable menu operations.
1)Press as to select [MENU LOCK].
2)Press qw to switch the item.
ff The items will switch each time you press the button.
[OFF] | Unlocks menu operations. |
[ON] | Locks menu operations. |
Note
ff When the entered password is incorrect after setting [MENU LOCK] to [ON], the <MENU> button cannot be operated.
ff [MENU LOCK] is set to [OFF] at the time of purchase or when [ALL USER DATA] in [INITIALIZE] (x page 98) is executed. ff The unlock state is held until the projector enters the standby mode.
[MENU LOCK PASSWORD]
The menu lock password can be changed.
1)Press as to select [MENU LOCK PASSWORD].
2)Press the <ENTER> button.
ff The [MENU LOCK PASSWORD] screen is displayed.
3)Press asqw to select the text, and press the <ENTER> button to enter the text.
4)Press asqw to select [OK], and press the <ENTER> button.
ff To cancel, select [CANCEL].
Attention
ff The initial password is “AAAA” by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 98) is executed. ff Change the password periodically that is hard to guess.
ENGLISH - 107