Panasonic PT-EW730Z, PT-EX800Z, PT-EZ770Z Connecting example: AV equipment, <DVI-DIN> terminal pin assignments and signal names, <DisplayPort IN> terminal pin assignments and signal names

Chapter 2 Getting Started — Connecting

<DisplayPort IN> terminal pin assignments and signal names

	Outside view			Pin No.	Signal name	Pin No.	Signal name
				(1)	MainLane-3	(11)	GND
Even-numbered pins of (2) to (20)				(2)	GND	(12)	MainLane+0
(2)			(20)	(3)	MainLane+3	(13)	GND
				(4)	MainLane-2	(14)	GND
				(5)	GND	(15)	Aux+
				(6)	MainLane+2	(16)	GND
				(7)	MainLane-1	(17)	Aux-
(1)		(19)
				(8)	GND	(18)	Hot plug detection
Odd-numbered pins of (1) to (19)
				(9)	MainLane+1	(19)	GND
				(10)	MainLane-0	(20)	DP_PWR *1

*1 Supplies power of +3.3 V/0.5 A Max. Use at the rated power or less.

<DVI-D IN> terminal pin assignments and signal names

Outside view			Pin No.	Signal name	Pin No.	Signal name
			(1)	T.M.D.S data 2-	(13)	—
			(2)	T.M.D.S data 2+	(14)	+5 V
			(3)	T.M.D.S data 2/4 shield	(15)	GND
(24)	(17)		(4)	—	(16)	Hot plug detection
			(5)	—	(17)	T.M.D.S data 0-
(16)		(9)	(6)	DDC clock	(18)	T.M.D.S data 0+
			(7)	DDC data	(19)	T.M.D.S data 0/5 shield
(8)	(1)		(8)	—	(20)	—
			(9)	T.M.D.S data 1-	(21)	—
			(10)	T.M.D.S clock1+	(22)	T.M.D.S clock shield
			(11)	T.M.D.S data 1/3 shield	(23)	T.M.D.S clock+
			(12)	—	(24)	T.M.D.S clock-

Connecting example: AV equipment

Blu-ray disc player

Audio device

VCR (with built-in TBC)

DVD player with HDMI terminal (HDCP)

Attention

ff Always use one of the following when connecting a VCR. gg A VCR with built-in time base corrector (TBC)

gg A time base corrector (TBC) between the projector and the VCR

ff If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector (TBC) between the projector and the external devices.

ENGLISH - 43