Chapter
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an item from the sub- menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. ff After selecting the item, press asqw to set.
[DIGITAL LINK MODE]
Switch the communication method of the <DIGITAL LINK/LAN> terminal of the projector.
1)Press as to select [DIGITAL LINK MODE].
2)Press qw to switch the item.
ff The items will switch each time you press the button.
[AUTO] | Switches the communication method automatically to DIGITAL LINK or Ethernet. |
[DIGITAL LINK] | Fixes the communication method to DIGITAL LINK. |
[ETHERNET] | Fixes the communication method to Ethernet. |
Possible communication modes
| Setting |
| Communication possible |
| |
| Image transmission | Ethernet | RS‑232C | ||
|
|
| |||
[AUTO] |
| For DIGITAL LINK | l | l | l |
| For Ethernet | ― | l | ― | |
|
| ||||
| [DIGITAL LINK] | l | l | l | |
| [ETHERNET] | ― | l | ― | |
l: Communication possible
―: Communication not possible
[DIGITAL LINK SETUP]
Set the communication method of DIGITAL LINK or Ethernet.
When the projector is connected directly via Ethernet
1)Press as to select [DIGITAL LINK SETUP].
2)Press the <ENTER> button.
ff The [DIGITAL LINK SETUP] screen is displayed.
3)Press as to select [DUPLEX(ETHERNET)].
4)Press qw to switch the communication method.
ff The items will switch each time you press the button.
[AUTONEGOTIATION] | The communication method is set automatically. |
5)Press as to select [STORE].
6)Press the <ENTER> button.
ENGLISH - 109