|
| Chapter | |
|
|
|
|
| [WIDE] |
| Select when an image aspect ratio is a |
|
| settings. | |
|
|
| |
| [USER] |
| Select when receiving a signal with a special horizontal resolution (number of display dots). |
ff When [DEFAULT] or [WIDE] is selected, proceed to Step 7). ff When [USER] is selected, proceed to Step 5).
5)Press as to select [DISPLAY DOTS], and press qw to adjust [DISPLAY DOTS] to the horizontal resolution of the signal source.
6)Press as to select [MODE].
7)Press the <ENTER> button.
ff Automatic adjustment is executed. [PROGRESS] is displayed while automatically adjusting. When complete, the system returns to the [AUTO SETUP] screen.
Adjusting position automatically
1)Press as to select [AUTO SETUP].
2)Press the <ENTER> button.
ff The [AUTO SETUP] screen is displayed.
3)Press as to select [POSITION ADJUST].
4)Press qw to switch the item.
[ON] | Adjust the screen position and size when automatic setup is executed. |
[OFF] | Does not perform automatic adjustment. |
Adjusting signal level automatically
1)Press as to select [AUTO SETUP].
2)Press the <ENTER> button.
ff The [AUTO SETUP] screen is displayed.
3)Press as to select [SIGNAL LEVEL ADJUST].
4)Press qw to switch the item.
[OFF] | Does not perform automatic adjustment. | |
[ON] | Adjusts black level | |
[CONTRAST]) when automatic setup is executed. | ||
|
Note
ff [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.
[RGB IN]
Set to match the signal to input to the <RGB 1 IN> terminal and <RGB 2 IN> terminal.
Switching the slice level of an input sync signal
1)Press as to select [RGB IN].
2)Press the <ENTER> button.
ff The [RGB IN] screen is displayed.
3)Press as to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].
4)Press qw to switch the item.
[LOW] | Sets the slice level to [LOW]. |
[HIGH] | Sets the slice level to [HIGH]. |
ENGLISH - 79