Chapter
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub- menu.
Refer to “Navigating through the menu” (x page 59) for the operation of the menu screen. ff After selecting the item, press asqw to adjust.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1)Press as to select [PICTURE MODE].
2)Press qw or the <ENTER> button.
ff The [PICTURE MODE] individual adjustment screen is displayed.
3)Press qw to switch the item.
ff The items will switch each time you press the button.
| [STANDARD] |
| The image becomes suitable for moving images in general. |
| [DYNAMIC] |
| The light output is maximized for use in bright areas. |
| [DICOM SIM.] |
| The image becomes similar to that of DICOM Part 14 Grayscale Standard. |
| [CINEMA]*1 |
| The image becomes suitable for movie contents. |
| [NATURAL]*2 |
| The image is sRGB compliant. |
*1 | Only for | ||
*2 | Only for still image input signals |
| |
Note
ff The factory default picture mode is [DYNAMIC] for still image input signals and [STANDARD] for
ff DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
[CONTRAST]
You can adjust the contrast of the colors.
1)Press as to select [CONTRAST].
2)Press qw or the <ENTER> button.
ff The [CONTRAST] individual adjustment screen is displayed.
3)Press qw to adjust the level.
Operation | Adjustment | Range of adjustment | |
Press the w button. | The screen becomes brighter. | ||
Press the q button. | The screen becomes darker. | ||
|
Attention
ff Adjust [BRIGHTNESS] first when you need to adjust the black level.
64 - ENGLISH