Chapter 4 Settings — [NETWORK] menu

13

[AROUND LAMP TEMPERATURE]

15

[SELF TEST]

 

Displays the status of the temperature around the lamp of the

 

Displays the self-diagnosis information.

 

projector.

16

[PROJECTOR RUNTIME]

14

[LAMP RUNTIME]

 

Displays the runtime of the projector.

 

Displays the runtime of the lamps (converted value).

 

 

Error information page

When [Error (Detail)] or [Warning (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error/warning details.

ff The projector may go into the standby status to protect the projector depending on the contents of the error.

1

1Self-diagnosis result display

Displays the item check results.

[OK]:

Indicates that operation is normal.

[FAILED]:

Indicates that there is a problem.

rr[FAILED] items

Item

Description

[MAIN CPU BUS]

There is a problem with the microcomputer circuitry. Consult your dealer.

[FAN]

There is a problem with the fan or the fan drive circuit. Consult your dealer.

[INTAKE AIR TEMPERATURE]

The air intake temperature is too high. The projector may be used in an environment

where the temperature is high, such as near a heating appliance.

 

[AROUND LAMP TEMPERATURE]

The temperature around the lamp is high. The air exhaust port may be blocked.

[LAMP REMAIN TIME]

The runtime of the lamp has exceeded the specified time, and it is time to replace the

lamp.

 

[LAMP STATUS]

The lamp has failed to turn on. Wait a while until the luminous lamp cools off, and then

turn on the power.

 

[APERTURE(CONTRAST-SHUTTER)]

There is a problem in the contrast shutter circuit for iris. Consult your dealer.

[SHUTTER(MUTE-SHUTTER)]

There is a problem with the shutter circuitry. Consult your dealer.

[INTAKE AIR TEMP.SENSOR]

There is a problem with the sensor used to detect intake temperature. Consult your

dealer.

 

[AROUND LAMP TEMP.SENSOR]

There is a problem with the sensor used to detect exhaust air temperature. Consult your

dealer.

 

[BATTERY]

Battery replacement is required. Consult your dealer.

[AIRFLOW SENSOR]

There is a problem with the airflow sensor. Consult your dealer.

[LENS MOUNTER]

There is a problem in the lens mounter. Consult your dealer.

[COVER OPEN]

Installation of the lamp cover is incomplete. Check the installation of the lamp cover.

(x page 133)

 

[PRESSURE SENSOR]

There is a problem with the sensor that detects air pressure. Consult your dealer.

[ANGLE SENSOR]

There is a problem with the sensor that detects angle. Consult your dealer.

[FILTER UNIT]

The air filter unit is not attached. Check the installation of the air filter unit. (x page 132)

[AIR FILTER]

There is too much dust accumulated in the air filter unit. Turn the <MAIN POWER>

switch to <OFF> (x page 49), and clean the air filter. (x page 132)

 

ENGLISH - 115