Chapter 3 Basic Operations — Operating with the remote control

2)Press the <KEYSTONE> button again.

ff The other individual adjustment screen is displayed.

When the [KEYSTONE] individual adjustment screen is displayed in Step 1), the [CORNER CORRECTION] individual adjustment screen ([UPPER LEFT]) is displayed.

Note

ff After the individual adjustment screen of [KEYSTONE] or [CORNER CORRECTION] is displayed, press asqw to adjust the keystone distortion.

ff Either setting of [KEYSTONE] or [CORNER CORRECTION] is enabled. If the other item is adjusted after [KEYSTONE] or [CORNER CORRECTION] was adjusted, the previous setting value will be reset.

ff If the <ENTER> button is pressed while the [CORNER CORRECTION] individual adjustment screen is displayed, the individual adjustment screen for the next corner is displayed.

ff Refer to the [POSITION] menu → [KEYSTONE] (x page 72) for details.

Using the digital zoom function

The [DIGITAL ZOOM] menu can be displayed.

You can enlarge images.

button

1)Press the <D.ZOOM> button.

ff The [DIGITAL ZOOM] screen is displayed.

2)Press qw to adjust the magnification.

3)Press the <ENTER> button.

4)Press asqw to move the zoom position.

Note

ff Refer to the [DISPLAY OPTION] menu → [DIGITAL ZOOM] (x page 86) for details.

Switching the aspect ratio of the image

You can switch aspect ratios according to the input signal.

button

1)Press the <ASPECT> button.

ff The setting will change each time you press the button.

Note

ff Refer to the [POSITION] menu → [ASPECT] (x page 70) for details.

Using the P IN P function

Locate a separate, small sub screen in the main screen to project two images simultaneously.

button

1)Press the <P IN P> button.

ff The setting will change each time you press the button.

Note

ff Refer to the menu [P IN P] menu (x page 100) for details.

56 - ENGLISH