Chapter 3 Basic Operations — Switching on/off the projector

Switching on/off the projector

Connecting the power cord

Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily. Confirm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.

For details of power cord handling, refer to “Read this first!” (x page 2).

Attaching the power cord

1)Check the shapes of the <AC IN> terminal on the rear of the projector body and the power cord connector, and insert the plug completely in the correct direction (until you hear the side tabs click in place).

Removing the power cord

1)Confirm that the <MAIN POWER> switch on the rear of the projector body is on the <OFF> side, and remove the power plug from the outlet.

2)Remove the power cord connector from the <AC IN> terminal of the projector body while pressing the side tabs.

Power indicator

Displays the status of the power. Check the <ON (G)/STANDBY (R)> status of the power indicator before operating the projector.

Power indicator <ON (G)/STANDBY (R)>

Indicator status

 

Projector status

Off

 

The main power is switched off.

 

 

The power is switched off (in standby mode).

Red

Lit

Projection will start when the power on <b> button is pressed.

ff The projector may not operate when the lamp indicator <LAMP> or temperature

 

 

 

 

indicator <TEMP> is flashing. (x page 129)

Green

Lit

Projecting.

Orange

Lit

The projector is preparing to switch off the projector.

The power is switched off after a while. (Changes to the standby mode.)

 

 

ENGLISH - 47