Chapter
[REMOTE2 MODE]
Set the <REMOTE 2 IN> terminal.
1)Press as to select [REMOTE2 MODE].
2)Press qw to switch the item.
ff The items will switch each time you press the button.
[DEFAULT] | The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the | |
projector. | ||
| ||
[USER] | Used to change the setting of the <REMOTE 2 IN> terminal. | |
[F/W SERIES] | The setting of the <REMOTE 2 IN> terminal is used for the F/W series compatibility. |
ff When [USER] is selected, proceed to Step 3).
3)Press the <ENTER> button.
4)Press as to select one from [PIN2] to [PIN8], and press qw to switch the setting.
[FUNCTION BUTTON]
Set the functions of the <FUNCTION> button on the remote control.
1)Press as to select [FUNCTION BUTTON].
2)Press the <ENTER> button.
ff The [FUNCTION BUTTON] screen is displayed.
3) | Press as to select a function. | |
|
|
|
| [DISABLE] | Disables the <FUNCTION> button. |
| [SUB MEMORY] | Displays the sub memory list. (x page 105) |
| [SYSTEM SELECTOR] | Switches the [SYSTEM SELECTOR] setting. (x page 68) |
| [DAYLIGHT VIEW] | Switches the [DAYLIGHT VIEW] setting. (x page 68) |
| [TEST PATTERN] | Displays the test pattern |
4) | Press the <ENTER> button. | |
[AUDIO SETTING]
Set audio functions in detail.
Adjusting the volume
1)Press as to select [AUDIO SETTING].
2)Press the <ENTER> button.
ff The [AUDIO SETTING] screen is displayed.
3)Press as to select [VOLUME].
4)Press qw to adjust the level.
Operation | Adjustment | Range of adjustment | |
Press w. | Increases the volume. | 0 - 63 | |
Press q. | Decreases the volume. | ||
|
Adjusting the left to right audio balance
1)Press as to select [AUDIO SETTING].
2)Press the <ENTER> button.
ff The [AUDIO SETTING] screen is displayed.
3)Press as to select [BALANCE].
94 - ENGLISH