Chapter 4 Settings — [DISPLAY OPTION] menu

Setting [RGB2 INPUT SETTING]

1)Press as to select [RGB IN].

2)Press the <ENTER> button.

ff The [RGB IN] screen is displayed.

3)Press as to select [RGB2 INPUT SETTING].

4)Press qw to switch the item.

ff The items will switch each time you press the button.

[RGB/YPBPR]

Select when inputting RGB signals or YCBCR/YPBPR signals to the <RGB 2 IN> terminal.

[Y/C]

Select when inputting luminance signals and color signals to the <RGB 2 IN> terminal.

[VIDEO]

Select when inputting video signals to the <RGB 2 IN> terminal.

[DVI-D IN]

Switch the setting when the external device is connected to the <DVI-D IN> terminal of the projector and the image is not projected correctly.

1)Press as to select [DVI-D IN].

2)Press the <ENTER> button.

ff The [DVI-D IN] screen is displayed.

3)Press as to select [EDID].

4)Press qw to switch the item.

ff The items will switch each time you press the button.

[EDID3]

Recognizes movie-based video signals and still image signals automatically.

[EDID1]

Select mainly when an external device that outputs movie-based video signals (such as a Blu-ray disc

player) is connected to the <DVI-D IN> terminal.

 

[EDID2:PC]

Select mainly when an external device that outputs still image video signals (such as a computer) is

connected to the <DVI-D IN> terminal.

 

5)Press as to select [SIGNAL LEVEL].

6)Press qw to switch the item.

ff The items will switch each time you press the button.

[AUTO]

Automatically sets the signal level.

[0‑255:PC]

Select when the DVI‑D terminal output of an external device (such as a computer) is connected to the

<DVI-D IN> terminal.

 

[16‑235]

Select when the HDMI terminal output of an external device (such as a Blu-ray disc player) is

connected to the <DVI-D IN> terminal via a conversion cable or similar cable.

 

Note

ff The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device.

ff The data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” (x page 148) for a resolution that supports plug and play.

[HDMI IN]

Set the signal level when HDMI input is selected.

1)Press as to select [HDMI IN].

2)Press the <ENTER> button.

ff The [HDMI IN] screen is displayed.

3)Press qw to switch the [SIGNAL LEVEL] item.

ff The items will switch each time you press the button.

[AUTO]

Automatically sets the signal level.

80 - ENGLISH