Features of the ProjectorHigh luminance and high contrast

▶▶A high luminance of 7 500 lm*1 and a high contrast of 5 000:1 are achieved by means of a unique optical system and lamp drive

system.

*1 For PT‑EX800Z

7 000 lm for PT‑EW730Z, and 6 500 lm for the PT‑EZ770Z

Easy and highly flexible setup

▶▶Easy and highly flexible setup is achieved by DIGITAL LINK compatibility, an electric lens shift function, and a lineup of various optional lenses.

Reduced maintenance costs

▶▶Maintenance costs are reduced by use of an extended-life filter and a recommended lamp replacement interval of 4 500 H*1.

*1 When [LAMP POWER] is set to [ECO2]

This time is only the target for replacement and not the warranty time.

Quick Steps

For details, refer to the corresponding pages.

1.Set up the projector. (x page 33)
2.Attach the Projection Lens. (x page 41)
3.Connect with external devices. (x page 42)
4.Connect the power cord. (x page 47)
5.Switch on the projector. (x page 48)
6.Make initial settings.
(x page 24)

ff Take this step when you switch on the power for the first time after purchasing the projector.

Energy conservation achieved through the ECO function

▶▶Lamp power is optimized according to the input image.*1 Power consumption is also reduced by optimizing the lamp power according to the brightness of the setup installation location, state of the input signals and state of the video mute.*2

*1 When [LAMP POWER] is set to [AUTO]

*2 When [ECO MANAGEMENT] is set to [ON]

7.Select the input signal. (x page 51)
8.Adjust the image. (x page 51)

ENGLISH - 13