Chapter
Click [Detailed set up] → [Network config].
ff Click [Network config] to display the [CAUTION!] screen.
ff Click the [Next] button to display the current settings.
ff Click the [Change] button to display the setting change screen.
1[PROJECTOR NAME]
Enter the name of the projector. Enter the host name if it is required when using a DHCP server etc.
2[DHCP ON], [DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
3[IP ADDRESS]
Enter the IP address when not using a DHCP server.
4[SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
5[DEFAULT GATEWAY]
Enter the default gateway address when not using a DHCP server.
Note
1
2
3
4
5 6 7
8
6[DNS1]
Enter the DNS1 server address.
Permissible characters for the entry of DNS1 server address (primary):
Numbers (0 - 9), period (.) (Example: 192.168.0.253)
7[DNS2]
Enter the DNS2 server address.
Available characters for the entry of DNS2 server address (secondary):
Numbers (0 - 9), period (.) (Example: 192.168.0.254)
8[Back], [Change]
Click the [Back] button to return to the original screen. The screen for confirming the current settings is displayed by clicking the [Change] button. Click the [Submit] button to update the settings.
ff When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click [Network config] again since the following operation will not be guaranteed.
ff Changing LAN settings while connected to the LAN may cause the connection to cut out.
[Ping test] pageCheck whether the network is connected to the
Click [Detailed set up] → [Ping test].
1
2 |
| 3 |
|
1[Input IP address]
Enter the IP address of the server to be tested.
2[Submit]
Executes the connection test.
4
3Example of display when the connection has succeeded
4Example of display when the connection has failed
118 - ENGLISH