Chapter 3 Basic Operations — Operating with the remote control

Attention

ff When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [SHUTTER DETECTION] is set to [ON], do not switch the shutter on (closed)/off (open) in a short time.

Note

ff The power indicator <ON (G)/STANDBY (R)> will flash slowly in green while the shutter function is in use.

Using the mute function

Audio can be temporarily turned off.

button

1)Press the <MUTE> button.

ff The audio disappears.

2)Press the <MUTE> button again.

ff The audio reappears.

Adjusting the volume

The volume of the built-in speaker or audio output can be adjusted.

button

1)Press the <VOL-> button/<VOL+> button on the remote control.

ff This operation can be also performed using the <VOL-> button/<VOL+> button on the control panel.

<VOL+>

Increases the volume.

<VOL->

Decreases the volume.

Using the freeze function

The projected image can be paused and audio turned off regardless of the playback of the external device.

button

1)Press the <FREEZE> button.

ff The image freezes and audio disappears.

2)Press the <FREEZE> button again.

ff Freezing of the image is canceled and audio reappears.

Note

ff [FREEZE] is displayed on the screen when video is paused.

Using the on-screen display function

Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen display, such as the menu or the input terminal name.

button

1)Press the <ON SCREEN> button.

ff The on-screen display disappears.

2)Press the <ON SCREEN> button again.

ff The on-screen display appears.

54 - ENGLISH