Chapter
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1)Press as to select [CONTROL DEVICE SETUP].
2)Press the <ENTER> button.
ff The [CONTROL DEVICE SETUP] screen is displayed.
3)Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL] You can set the limitation on the control from the control panel.
[REMOTE CONTROL] You can set the limitation on the control from the remote control.
4)Press the <ENTER> button.
ff The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
5)Press as to select [ENABLE] or [DISABLE].
ff You can set the operation restriction from the control panel or the remote control.
[ENABLE] | Enables all button operations. |
[DISABLE] | Disables all button operations. |
6)Press the <ENTER> button.
ff The confirmation screen is displayed.
7)Press qw to select [OK], and press the <ENTER> button.
Note
ff When a button operation is performed on the device set to [DISABLE], the [MENU LOCK PASSWORD] screen is displayed. Enter the menu lock password.
ff The [MENU LOCK PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
ff If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot enter standby).
ff When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main menu.
ff Even when you set button operations on the remote control to be disabled, operations of the <ID ALL> and <ID SET> buttons on the remote control are enabled.
108 - ENGLISH