Chapter 4 Settings — [DISPLAY OPTION] menu

2)Press the <ENTER> button.

ff The [SHUTTER SETTING] screen is displayed.

3)Press as to select [SHUT-OFF].

4)Press qw to switch the item.

[KEEP CURRENT STATE]

When the projector is switched off, the projector turns into standby with the shutter status as is.

[OPEN]

When the projector is switched off, the projector turns into standby with the shutter left opened.

[CLOSE]

When the projector is switched off, the projector turns into standby with the shutter left closed.

[P-TIMER]

Set and operate the presentation timer function.

Setting the mode

1)Press as to select [P-TIMER].

2)Press the <ENTER> button.

ff The [P-TIMER]screen is displayed.

3)Press as to select [MODE].

4)Press qw to switch the item.

[COUNT UP]

Displays the elapsed time since the count was started.

[COUNT DOWN]

Displays the remaining time of the time set by [TIMER].

Setting the timer

1)Press as to select [P-TIMER].

2)Press the <ENTER> button.

ff The [P-TIMER]screen is displayed.

3)Press as to select [TIMER].

4)Press qw to set the time.

ff The time can be set in 1-minute increments from 1 to 180 minutes. ff The factory default value is 10 minutes.

Note

ff [TIMER] is enabled when [MODE] is set to [COUNT DOWN].

Using the presentation timer

1)Press as to select [P-TIMER].

2)Press the <ENTER> button.

ff The [P-TIMER]screen is displayed.

3)Press as to select the item, and press the <ENTER> button.

[START]

The count is started.

[STOP]

The count is stopped.

[RESTART]

The count is resumed.

[RESET]

The count is reset.

ff When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the bottom right of the projected image.

ff When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed at the bottom right of the projected image.

ff When [RESET] is selected, proceed to Step 4).

ENGLISH - 85