Chapter
Note
ff When a name is changed, display of [USER] is also changed.
[GAMMA]
You can adjust contrast balance.
1)Press as to select [GAMMA].
2)Press qw or the <ENTER> button.
ff The [GAMMA] individual adjustment screen is displayed.
3)Press qw to adjust the level.
Operation | Adjustment | Range of adjustment | |
Press w. | The midtones become brighter. | ||
Press q. | The midtones become darker. | ||
|
[SHARPNESS]
You can adjust the sharpness of the projected image.
1)Press as to select [SHARPNESS].
2)Press qw or the <ENTER> button.
ff The [SHARPNESS] individual adjustment screen is displayed.
3)Press qw to adjust the level.
Operation | Adjustment | Range of adjustment | |
Press the w button. | Contours become sharper. | 0 - +15 | |
Press the q button. | Contours become softer. | ||
|
Note
ff If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value will become [+15].
[NOISE REDUCTION]
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1)Press as to select [NOISE REDUCTION].
2)Press qw or the <ENTER> button.
ff The [NOISE REDUCTION] individual adjustment screen is displayed.
3)Press qw to switch the item.
ff The items will switch each time you press the button.
[OFF] | No correction. |
[1]Slightly corrects the noise.
[2]Moderately corrects the noise.
[3]Strongly corrects the noise.
Attention
ff When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].
[IRIS]
Aperture correction is performed automatically based on the image to result in an image of optimum contrast.
1)Press as to select [IRIS].
2)Press qw or the <ENTER> button.
ff The [IRIS] individual adjustment screen is displayed.
ENGLISH - 67