Fax Access Code
The Fax Access Code prevents an unauthorized user from operating the machine, Once a 4-digit Fax Access
Code is registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to reenter the access code in order to use the machine
again. Registering the Fax Access Code does not affect the use of the machine in any other way.
Setting the Fax Access Code
SET MODE iFUNCTION ENTER NO. OR V II-6)
SET
2FAX PARAMETER (0i-99)
NO.=11 ,
SET
338 FAX ACCESS CODE i
I
Illl
Enter a 4-digit Fax Access Code.
Ex: 38 FAX ACCESS CODE
1234 I
IIIIIIIII IIIIII

5©

For UF-550 skip to step 7. (The UF-550 cannot select
restriction level. ALL only.)
Select Restriction Level
(_ for All operations
_) for Setting and Printout of Fax Parameters only.
Ex:
38 FAX ACCESS CODE i
I:ASL 12341
38 FAX ACCESS CODE i
2:FAX PARA. 12341
r_ Note: To erase the Fax Access Code, enter Access Code and press _and followthe procedure above
to step 3, then press _ _ and _-0_ .