Basic Transmission Settings

Halftone

The Halftone setting is useful when sending photographs or illustrations with gray tones. Your machine is
preset to HALFTONE = Off. You can select either Fast mode or Quality mode.
Press__ HALFTONE l to:
FAST r'_ FAST _ID:_ FAST
\ ] /
QUALITY -t{ QUALITY _QUALITY
HALFTONE _I-_ALFTONE HALFTONE
HALFTONE=Off HALFTONE =Quality HALFTONE = Fast
F_ Note: When youse/ectHALFTONE, FASTorQUALITY, yourmachinewillautomatical/ysetectFineResolution.

Verification Stamp

The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with asmall _) mark.

Press _to:

STAMP=Off STAMP=On
[]Note: 1. When you store a document in memory,, the Verification Stamp wil/ stamp on the document ff ff is
successfully stored in memory. In this case the Verification Stamp is not aconfirmation that the
document was successfully transmitted, ff you wishto disable the use of the Verification Stamp when
storing document in memory, change the setting of Fax Parameter No. 28, see page 36.
2. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04, see
page 35.
42