Patton electronic 3088 Configuring The Dip Switches, Parameter, Description, Possible, Default

Parameter	Description	Possible	Default
		Values	Value
DSL Error	The number of errored inter-	1–255	3
Monitor	vals allowed before restart-
Interval	ing the DSL link.
Count
DSL Error	The number of intervals to	0–255	10
Monitor	inspect before disabling the
Total Inter-	error monitor.
vals
DSL Error	The length, in seconds, to wait	0–255	5
Monitor	after DSL link comes up before
Startup	enabling the error monitor.
Delay

4.1 CONFIGURING THE DIP SWITCHES

The Model 3088 is equipped with two sets of DIP switches, which allow con- figuration of the unit for a wide variety of applications. This section describes switch locations and explains all possible configurations.

The two sets of DIP switches are externally accessible from the under- side of the Model 3088 (see figure 2).

S1

S2

			G7	.	G	Ml
		704	.		1E
		Test	eS
Modes
		Mdeo
	Fiber
Quad	-

703/G	.G
704.
Modem

1		ON
2
3
4
5
6
7
8
	S1

1		ON
2
3
4
5
6
7
8
	S2

Figure 2. Underside of Model 3088 showing location of DIP switches

11